Energy monitoring hub data acquisition system (48 pages)
Summary of Contents for Leviton EMH
Page 1
Energy Monitoring Hub Data Acquisition System Cat. No. A8812 Quick Start Guide DG-001-A8812-00A...
Page 3
1 PRODUCT APPLICATION LIMITATION • Leviton products are not intended for use in critical applications such as nuclear facilities, human implantable devices or life support. Leviton is not liable, in whole or in part, for any claims or damages arising from such uses.
Page 4
2 OVERVIEW The Energy Monitoring Hub (EMH) is a data acquisition system which provides owners and managers of commercial and industrial facilities with a cost-effective means of gathering crucial information in a timely manner. The DAS footprint and industrial temperature range makes this a perfect solution for embedded applications.
2 wire, twisted pair with shield for Modbus/RS485 connection (Belden 1120A or equivalent). • Termination resistor (120 ohm) for long RS485 runs over 200 ft. Data Acquisition Server (A8810 EMB Hub, A7810 EMB HubLite, and A8812 EMH) Energy Monitoring Hub A8812...
Page 6
4 HARDWARE AND ELECTRICAL CONNECTION DIAGRAM Figure 1 Unpack materials. Mount the DAS using the mounting holes in the back panel of the enclosure with screws. (Optional) Connect the Modbus network loop as shown in the above diagram. Follow the manufacturer’s instructions for installing and powering the Modbus devices.
Page 7
5 DHCP ENABLED MODE Confirm the DAS is properly connected to the computer or a LAN, and both are powered on. Confirm that DHCP is enabled on the computer. For most computers, this is the default setting. To confirm you have established connection to the device, do a ping to the IP address shown in the DAS’s LCD display.
6 STATIC IP MODE Confirm the DAS is properly connected to the computer, and both are powered on. On the DAS, click the “Menu” button to select the “TCP/IP Config” option. Click the “Select” button to enter the “TCP/IP Menu”. Select the “DHCP+UPnP on/off”...
Page 9
6 STATIC IP MODE Enter the desired admin user password in both boxes and click the Apply button. Figure 6 A Thank You message will be displayed, confirming that the password was succesfully set. Click on the line below to proceed to the login screen. Figure 7...
Page 10
7 LOGGING INTO THE EMB HUB From the web browser interface, click on “Click here to enter”. Enter the username and password. Figure 8 Login successful. Figure 9...
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option.
Need help?
Do you have a question about the EMH and is the answer not in the manual?
Questions and answers