ACCO Brands ACCOLIFT CLH Instruction Manual For Installation / Operation / Maintenance / Parts page 9

hoists feature lower headroom than conventional hoists. Due to their compact size
these hoists fit well into jib crane and light rail applications. These hoists are available for single-phase
and three-phase applications. Careful consideration has been given to optimize performance.
All hoists are equipped with quality parts and mechanisms to provide proper lifting and traversing
of the load. Components undergo numerous tests and inspections, while our production processes
meet stringnet quality requirements.
Upper Limit Switch
Electric Chain Hoists are allocated to mechanism groups in accordance with the
following regulations. Under the allowance of the following mechanism groups, the hoist should
be operated and should not exceed the nominal values. On each identification plate, the following
is indicated.
Hook suspension chain hoist <3 phase> : FEM9.511(Hoist = FEM 2m 40% ED)
Hook suspension chain hoist <1 phase> : FEM9.511(Hoist = FEM 2m 30%ED)
Load group
Light
k 0.50
Medium
0.50 k 0.63
Heavy
0.63 k 0.8
Very Heavy
0.8 k 1.00
cone brake
prevents over-lifting of chain
Average operating period per day (h)
2 2-4 4-8
1 1-2 2-4
0.5 0.5-1 1-2
0.25 0.5 0.5-1
8-16 16
4-8 8-16
2-4 4-8 8-16
1-2 2-4 4-8
-
16
9