Advertisement
Table of Contents
- 1 Additional Materials
- 2 Safe Installation
- 3 Deactivate the Power to the Spa. Remove the Old Skirting
- 4 Starting at the Left Panel Flange, Hold One End of the String to the Edge on the Flange
- 5 Continue Installing the Panels Making Sure to Overlap at each End
- 6 Confer Plastics Inc. Five Year Warranty
- Download this manual
Dealer/Installer: Give manual to homeowner.
Installer: Read "Safe Installation" on page # 2 and all instructions before beginning. For proper assembly
and installation, instructions must be followed completely.
FLEXIBLE SPA PANEL KIT
INSTALLATION INSTRUCTIONS
To reduce the risk of electrocution, cuts, or other serious injury or death:
By Confer Plastics
www.conferplastics.com
MADE IN THE USA
FSP
Advertisement
Table of Contents
Related Manuals for Confer Plastics FLEXIBLE SPA PANEL KIT
Summary of Contents for Confer Plastics FLEXIBLE SPA PANEL KIT
- Page 1 Dealer/Installer: Give manual to homeowner. Installer: Read "Safe Installation" on page # 2 and all instructions before beginning. For proper assembly and installation, instructions must be followed completely. FLEXIBLE SPA PANEL KIT By Confer Plastics INSTALLATION INSTRUCTIONS MADE IN THE USA...
- Page 2 Safe Installation To reduce the risk of electrocution, cuts, or other serious injury or death: Use for intended purpose only • Use only as spa skirting. • Installation of spa skirting may prevent access to electrical and mechanical equipment. Plan accordingly. Follow all instructions •...
- Page 3 WARNING! WARNING! Using Failure to a corded drill near disconnect power to the spa pool may result in may result in electrocution. electrocution. Deactivate the power to the spa. Remove the old skirting Using a circular saw with a fine tooth blade, cut all 5 panels and measure the height.
- Page 4 Starting at the left panel flange, hold one end of the string to the edge on the flange. Have your helper wrap the string around the spa to determine where the panel will end. Mark the location. Continue this process to determine all of the panel locations marking the start/stop of each panel on the spa.
- Page 5 Continue installing the panels making sure to overlap at each Measure from the outside of each flange and subtract 1” end. The last panel will have to be cut in length to butt up to from that measurement. Cut a panel to length using this mea- the flange edge.
- Page 6 CONFER PLASTICS INC. FIVE YEAR WARRANTY Confer Plastics Inc. warrants their spa panels to be free from defects in workmanship for five years from date of purchase. DO NOT RETURN DEFECTIVE PART TO DEALER E-MAIL CONFER PLASTICS AT: CUSTOMERSERVICE@CONFERPLASTICS.COM A PICTURE [S] OF DEFECTIVE PART, A BRIEF DESCRIPTION OF PROBLEM, PROOF OF PURCHASE AND YOUR CONTACT INFORMATION.
Need help?
Do you have a question about the FLEXIBLE SPA PANEL KIT and is the answer not in the manual?
Questions and answers