Download Print this page

Confer Plastics Signature Spa Steps Assembly And Instruction Manual

Advertisement

Quick Links

Confer - Signature Spa Steps
ASSEMBLY AND INSTRUCTION MANUAL
36" or 74" Parts
(3 & 4 Step)
Sidewall
(4-step)
Handrail Post
Cup Holder /
Towel Rack
36" 3 Step
2 - Sidewalls (3 step)
CARTON #1 CONTAINS:
2 - Handrails
4 - Handrail Posts
2 - Cup Holder / Towel Rack
1 - Hardware Bag:
4 - Plugs
2 - Foam Strips (4 pads/strip)
4 - #10 x 1-1/4" Screws
1 - Set of Instructions
3 - 36" Steps
CARTON #2 CONTAINS:
7 - 36" x 3" supports
36" 4 Step
2 - Sidewalls (4 step)
CARTON #1 CONTAINS:
2 - Handrails
4 - Handrail Posts
2 - Cup Holder / Towel Rack
1 - Hardware Bag:
4 - Plugs
2 - Foam Strips (4 pads/strip)
4 - #10 x 1-1/4" Screws
1 - Set of Instructions
4 - 36" Steps
CARTON #2 CONTAINS:
9 - 36" x 3" supports
www.conferplastics.com
3" Support
Step
74" 3 Step
4 - Sidewalls (3 step)
CARTON #1 CONTAINS:
2 - Handrails
4 - Handrail Posts
2 - Cup Holder / Towel Rack
1 - Hardware Bag:
4 - Plugs
2 - Foam Strips (4 pads/strip)
4 - #10 x 1-1/4" Screws
1 - Set of Instructions
3 - 74" Steps
CARTON #2 CONTAINS:
7 - 74" x 3" supports
Made in U.S. . by
Handrail
Sidewall
(3-step)
74" 4 Step
4 - Sidewalls (4 step)
CARTON #1 CONTAINS:
2 - Handrails
4 - Handrail Posts
2 - Cup Holder / Towel Rack
1 - Hardware Bag:
4 - Plugs
2 - Foam Strips (4 pads/strip)
4 - #10 x 1-1/4" Screws
1 - Set of Instructions
4 - 74" Steps
CARTON #2 CONTAINS:
9 - 74" x 3" supports
Cup Holder/
Towel Rack

Advertisement

loading

Summary of Contents for Confer Plastics Signature Spa Steps

  • Page 1 Confer - Signature Spa Steps ASSEMBLY AND INSTRUCTION MANUAL 3” Support 36” or 74” Parts (3 & 4 Step) Handrail Sidewall (4-step) Handrail Post Sidewall Cup Holder / (3-step) Towel Rack Step 36” 3 Step 74” 3 Step 36” 4 Step 74”...
  • Page 2 Confer - Signature Spa Steps ASSEMBLY AND INSTRUCTION MANUAL NOTE: STEP PARTS ARE DESIGNED FOR A TIGHT FIT, USING LIQUID SOAP DETERGENT WILL MAKE ASSEMBLY EASIER. Step 1: Install the foam pads [4 for Step 2: Using a rubber mallet install Step 3: Turn the step assembly over 36”...