Table of Contents
Advertisement
Example 2.1:
Set Code 128 length range is 4-12bit
Step: Set "Code 128 Minimum（0~50bit）"; Set"4"; Set "Save"
Set "Code 128 Maximum (0+-50bit)"; Set"1""2"; Set "Save"
Example 2.2:
Set Interleaved 2 of 5 length is 14bit
It can set up by "ITF25 14bit", through barcode length range of Maximum /Minimum to
set,too.
Step: Set" Interleave 2 of 5 Minimum（0~50bit）"; Set"1""4";Set"Save"
Set" Interleave 2 of 5 Maximum (0+50bit)"; Set"1""4"; Set"Save"
Example 2.3:
Set Code 39 length is random length
Step: Set" Code 39 Minimum（0~50bit）"; Set"0" ; Set"Save"
Set"Code 39 Maximum (0+50bit)"; Set"0"; Set "Save"
Example for USB keyboard transmit speed configuration
If PC in a lower function, it will appear error status. Need to set up a slow scanning speed with
customized under USB keyboard mode. Such as: 50ms
Step: Set"Custom Sending Speed"; Set"5""0";Set"Save"
Warning Tone
It will appear error warning for 4 times in a continue while transfer failure barcode. Please check
if it's normal work when appear this situation.
Read Skills
To get a good reading performance,a beam of aim light from scanner should be aimed at the
centre of barcode , support to aim in any directions for read convenient,too.
More nearly barcode, the beam of aim light is smaller; More further barcode, the beam of aim
light bigger. For reading barcode correctly,if barcode small, the scanner should be close to
barcode, if barcode big, the scanner should be farther to barcode.
If the barcode is highly reflective (for example: coated surface), please adjust the scanner angle to
read it successfully.
72
Advertisement
Table of Contents
