Advertisement
GIRA
Smoke detector plus / VdS
Info
Instructions for Installation
Monthly
•
Press the test button;
–
If it emits the warning tone, the home smoke detector is in good working order.
–
If the warning tone is not emitted, please check the battery connection or replace the battery
with a new one. If the test results are then still negative, the home smoke detector must be
replaced.
6-monthly
•
Remove the home smoke detector from its base and wipe it with a damp cloth.
•
Reinsert the home smoke detector in its base and turn it clockwise until it clicks into place.
Technical data
Sensitivity
Operating voltage
Current consumption
Quiescent current
Alarm current (type without relay)
Alarm current (relay type)
Relay module
Switched voltage
Switched current
Battery
Battery type
Battery low power signal
Alarm indicator
Sounder
Ingress protection
Ambient service temperature
Storage temperature
VdS approval
Weight (without battery)
Acceptance of guarantee
We accept the guarantee in accordance with the corresponding legal provisions.
Please return the unit postage paid to our central service department giving a brief description
of the fault:
Gira
Giersiepen GmbH & Co. KG
Service Center
Dahlienstrasse 12
D-42477 Radevormwald
The CE sign is a free trade sign addressed exclusively to the authorities and does not include
any warranty of any properties.
Gira
Giersiepen GmbH & Co. KG
Postfach 1220
D-42461 Radevormwald
Smoke detector plus / VdS
to prEN 12239 (95)
9 V DC
typical
max.25 mA
max.50 mA
NO contacts, volt-free
max. 30 V DC
max. 1 A
rectangular battery
ICE6 LR 61, 9 V
1/min, 30 days
LED, red
85 dB (A)
IP 42
+ 5 to + 40 °C
- 5 to + 60 °C
see nameplate on smoke detector
130 g
Telefon: +49 / 21 95 / 602 - 0
Telefax: +49 / 21 95 / 602 - 339
Internet: www.gira.de
02/02
Seite: 6 von 6
Advertisement
