Bosch Professional GIS 500 Original Instructions Manual page 6

6 | English
Have the measuring tool serviced only by a qualified specialist using only ori-
u
ginal replacement parts. This will ensure that the safety of the measuring tool is
maintained.
Do not let children use the laser measuring tool unsupervised. They could acci-
u
dentally dazzle someone.
Do not use the measuring tool in explosive atmospheres which contain flam-
u
mable liquids, gases or dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
The measuring tool may not be 100% accurate for technological reasons. Envir-
u
onmental factors (e.g. dust or steam in the area being measured), temperature fluctu-
ations (e.g. from fan heater) as well as the nature and condition of the surfaces being
measured (e.g. highly reflective or transparent materials) can distort measurement
readings.
Protect the measuring tool, particularly the area around the infrared lens and
u
laser, from moisture and snow. The reception lens could fog up and distort the
measurements. Incorrect settings on the tool and other atmospheric influences may
make the measurements inaccurate. Otherwise, object temperatures could be shown
to be hotter or colder than they are, which may present a danger if touched.
Temperature measurements will only be correct if the emissivity setting
u
matches the emissivity of the object. Otherwise, object temperatures could be
shown to be hotter or colder than they are, which may present a danger if touched.
Take the batteries out of the measuring tool when it is being stored or transpor-
u
ted. Persons are at risk of being blinded if the on/off switch is unintentionally
pressed.
Product Description and Specifications
Please observe the illustrations at the beginning of this operating manual.
Intended Use
The measuring tool is intended for contactless measurement of surface temperature.
The measuring tool must not be used for temperature measurement on persons and an-
imals or for other medical purposes.
The measuring tool is not suitable for surface temperature measurement of gases or li-
quids.
The measuring tool is not intended for temperature measurement of food.
The measuring tool is suitable for indoor use.
1 609 92A 5H0 | (16.12.2019) Bosch Power Tools