Data Transfer Interval Request; Configure Train To Yard Time Interval - Black Box JIDO T63 User Manual

CHAPTER 3: DEVICE CONFIGURATIONS
MESSAGE TO DEVICE
EXAMPLE
*10,Y,050,3600,020,3000,020,720
0,K,060,3350,030,3300,030,3200
,N,065,3150,030,3100,030,3000#

3.2.7 DATA TRANSFER INTERVAL REQUEST

TABLE 3-27. DATA TRANSFER INTERVAL REQUEST MESSAGE TO/FROM DEVICE
MESSAGE TO DEVICE
*10#

3.2.8 CONFIGURE TRAIN TO YARD TIME INTERVAL

SEQUENCE PARAMETER
1 SOH
2 Command ID
3 Time Interval
4 EOH
MESSAGE TO DEVICE
EXAMPLE
*11,3600#
18
TABLE 3-26. MESSAGES TO/FROM DEVICE
RETURN MESSAGE FROM DEVICE
SUCCESS
*12345678910101000,10,1#
*Device ID,Command ID,status#
CONDITION
TABLE 3-28. TRAIN TO YARD TIME INTERVAL CONFIGURATION
DATA
*
11
3600
#
TABLE 3-29. MESSAGES TO/FROM DEVICE
RETURN MESSAGE FROM DEVICE
SUCCESS
*12345678910101000,11,1#
*Device ID,Command ID,status#
1.877.877.2269
DESCRIPTION
Header
For Time interval of Mode change data
Mode Change data sent in after 1 hr
Footer
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
FAILURE
*12345678910101000,10,0#
REPLY FRM DEVICE
*10,Y,Y_bat_up_level,Y_bat_up_interval,Y
_bat_low_level,Y_bat_medium_interval,Y_low_
level,Y_low_interval,K,K_bat_up_level,K_bat_
up_interval,K_bat_low_level,K_bat_medium_
interval,K_low_level,K_low_interval,N,N_bat_up_
level,N_bat_up_interval,N_bat_low_level,N_bat_
medium_interval,N_low_level,N_low_interval#
REMARKS
Always 1 byte
Always 2 bytes
Varies from 1- 5 bytes
Always 1 byte
FAILURE
*12345678910101000,11,0#