Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RehabPro M30
Summary of Contents for RehabPro M30
- Page 1 RehabPro Standard Pulley (M30, M50, M30F, M50F) User Manual...
- Page 2 1. Inspection of Delivery Before unpacking the Pulley please inspect the packaging for shipping damage. Observable damage should be noted prior to signing the bill of lading. Please contact RehabPro, Inc. or your local dealer with any concerns or questions about shipping damage.
- Page 3 2. Drywall attached to aluminum studs. Attach two 1x4 boards horizontally in space, long enough to span two studs (4 studs for parallel pulleys). Use 2.5 anchor bolts (see picture below) to sandwich the boards against the wall. Like attachment option # 1 the center of the lower board has to be 3.5 above the floor.
- Page 4 5. Utilization 1. Adjusting the weight All RehabPro pulleys are magnetic, pin select and all weight stacks are measured in pounds. The weight stack measures as follows: Increment Weight Resistance Increment Weight Total Weight 1.25 lbs. 1.25 lbs. # 11 2.50 lbs.
- Page 5 Make sure the rope glides smoothly on the pulley wheels. AND, look for fraying . Change the rope when the outer layer has become fuzzy . You can contact RehabPro, Inc. directly or your local dealer for a rope replacement kit.
- Page 6 1. How to thread / replace the pulley rope 1. Run the rope through the upper glider, front to back. 2. Bring the rope downward to the lower glider and bring the rope through front to back. 3. Bring the rope upward to the pulley wheel on the top box. Run the rope through front to back.
- Page 7 3. The outer layer of my rope has become fuzzy. What should I do? - The rope should be changed when the outer layers of the rope starts to fray. Please contact RehabPro, Inc. directly for a new, non-stretchable rope.
Need help?
Do you have a question about the M30 and is the answer not in the manual?
Questions and answers