11.3 Checking efficiency ........................10 Maintenance........................10 12.1 Cleaning the tank ........................10 12.2 Resetting the machine ....................... 10 Trouble Shooting........................ 11 lancerbeverage.com Page 2 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
Dispensing Equipment based in San Antonio, Texas. Lancer has manufacturing bases and distribution networks in 97 countries. Lancer is in turn ultimately owned by Hoshizaki Electric Co Ltd of Nagoya, Japan. Hoshizaki is a global leader in food service equipment.
Ensure that the chiller is maintained according to service manual instructions. Do not allow any unauthorised modifications to the machine. lancerbeverage.com Page 4 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
Do not remove protective covers or safety grids during machine operation. Always keep hands and fingers away from moving parts. lancerbeverage.com Page 5 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
Transport and handling the machine without packaging The machine must always be handled in a vertical position using forklifts or by manually lifting the machine. lancerbeverage.com Page 7 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
Connect the outlets of the overflow pipe, with the plastic pipe, to the nearest drain. Replace the cover. lancerbeverage.com Page 8 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
Caution: always wear protective gloves for this operation. lancerbeverage.com Page 9 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
Check that the overflow pipe and the piping are free from any obstructions. 12.2 Resetting the machine After placing the machine covers, insert the machine’s electrical plug in the mains outlet lancerbeverage.com Page 10 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
The agitator motor is Ball bearing fault Replace agitator motor pump noisy Worn bushings Replace agitator motor pump lancerbeverage.com Page 11 of 11 Hoshizaki Lancer reserve the right to change specifications without notice No 005 – 26 October 2010...
Need help?
Do you have a question about the Lancer Mini Lady and is the answer not in the manual?
Questions and answers