Advertisement

WARRANTY AND DISCLAIMER

DIGITAL DELAY ELECTRONICS INC. WARRANTS THE PRODUCTS IT
MANUFACTURES AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP
FOR A PERIOD LIMITED TO 1 YEAR FROM THE DATE OF SHIPMENT,
PROVIDED THE PRODUCTS HAVE BEEN STORED, HANDLED, INSTALLED,
AND USED UNDER PROPER CONDITIONS.
The company's liability under this limited warranty shall extend only to the
repair or replacement of a defective product, at the company's option. DIGITAL DELAY
ELECTRONICS INC. disclaims all liability for any affirmation, promise, or representation
with respect to the products.
The customer agrees to hold DIGITAL DELAY INCORPORATED and
DIGITAL DELAY ELECTRONICS INCORPORATED harmless from, defend, and
indemnify DIGITAL DELAY INC. and DIGITAL DELAY ELECTRONICS INC. against
damages, claims, and expenses arising out of subsequent sales of or use of DIGITAL
DELAY
ELECTRONICS
manufactured by DIGITAL DELAY ELECTRONICS INC. and based upon personal
injuries, deaths, property damage, lost profits, and other matters which BUYER, its
employees, or sub-contractors are or may be to any extent liable, including without
limitation, penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and
liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L. 93-
637), as now in effect or as amended hereafter.
No warranties expressed or implied, are created with respect to the company's
products except those expressly contained herein.
disclaimers and limitations contained and relies on no other warranties or affirmations.
Elite 95
INC.
products,
1
2036 Fillmore Street
Davenport, Ia. 52804
563-324-1046
www.racedigitaldelay.com
or
products
containing
The customer acknowledges the
components

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elite 95 and is the answer not in the manual?

Questions and answers

Summary of Contents for DIGITAL DELAY Elite 95

  • Page 1: Warranty And Disclaimer

    AND USED UNDER PROPER CONDITIONS. The company’s liability under this limited warranty shall extend only to the repair or replacement of a defective product, at the company’s option. DIGITAL DELAY ELECTRONICS INC. disclaims all liability for any affirmation, promise, or representation with respect to the products.
  • Page 2: Table Of Contents

    The Elite Series also adds the ability to Tap Up and Down on the same pass. Digital Delay has also added a fourth Push-button Mode to the Elite 95 designed especially for tracks using CrossTalk.
  • Page 3: Features And Specifications

    Features and Specifications Features: • Microprocessor controlled timing • Discrete I/O (input - output) construction • Retains all numbers even with power disconnected from unit • Large illuminated display for easy reading of information day or night • Self-test mode on all display functions •...
  • Page 4: The Keypad

    Their Dial press the 2ND key. The selection arrows will now be on the right side of the display above Their Dial. 3) Next press the Clear key, this will clear out the value for Their Dial making the Elite 95 ready for a new value.
  • Page 5: Setting Dial-Ins And Delay Times

    Elite 95 is set to Tap Down, and a subtraction from the delay time will be done. If there is a blank in front of the two digits the Elite 95 is set to Tap Up, and an addition to the delay time will be done. To select either Tap Up or Tap Down mode use the arrow keys.
  • Page 6: Setting Push-Button Mode And Interrupt Time

    While in Push-button Mode 2 the Elite 95 can Tap Up or Down but not both on the same pass. The Tap Up or Down feature is controlled by an additional button. To connect the Tap button, connect one wire from the button to the Tap terminal and the other wire to +12 Volts.
  • Page 7 Push-button Mode 4 is mainly used when the driver wants two hits at a tree using CrossTalk. When selected, the Elite 95 allows the two hits at the tree with one button. The button is used to start both the primary and secondary timer sequentially.
  • Page 8: How Late

    .522 for the primary delay. With the time slip and the How Late information a driver can adjust both Delay timers as needed. The How Late only works in Push-button Modes 2 and 3. If the Elite 95 is set in Push-button Mode 1 or 4 two dashes will be shown for the How Late screen indicating the How Late feature is not currently available.
  • Page 9: Explanation Of The 4-Stage Timer

    Above each stage time is the Throttle Mode, either ON or OFF for that stage. An ON for any stage means that the Elite 95 will send out 12 Volts for that stage. While an OFF for any stage means no voltage will be sent out for that stage. To change whether the output on the terminal strip will put out 12 volts or remove 12 volts to close the throttle stop, press the 5 key to display the Stage 1 and Stage 2 times.
  • Page 10: Explanation Of The Starting Line Enhancer

    Then use the Up or Down arrow keys to change the Starting Line Enhancer mode to the desired number. The Elite 95 uses the Throttle Mode setting to control whether the output on the terminal strip for the Starting Line Enhancer is putting out 12 volts or taking 12 volts away when activated.
  • Page 11: Mounting And Wiring The Unit

    Mounting the Unit For complete viewing of the LCD, care should be taken when mounting the unit to make sure that the display is angled towards the driver’s eyes. Before mounting the unit, place box in the desired location and check the legibility of the display in both day and night conditions.

Table of Contents