Table of Contents
Advertisement
10.4 Factory Default Reset:
To remove Custos BVS without involve gateway in Exclusion / Remove device operation and BVS will reset all setting to
Factory Default Setting.
i. Start: Long hold Touch Sense Button for 10 seconds then short click 5 times.
ii.
Processing: Yellow LED ON 1 second then wait 2-5 seconds
iii. Success: Green LED on 2 second with long beep sounds for 2 seconds.
*Factory Default Reset will:
a. Remote the product from Z-Wave Network;
b. Delete the association setting;
c.
Restore the configuration settings to the default.
Ubitech Ltd.
BVS-ZWx User Manual
.
Page: 21
Date:02-APR-2020
Version: 0.9.4
Advertisement
Table of Contents
