Msd3463 Software Upgrades (After Service); Software Upgrade Tools And Materials - Philips 32PHT4001/60 Service Manual

1、 Software upgrade tools and materials
u AC100~240V power supply and power cord
u
USB flash disk（2.0 version，Capacity not more than 4G）
2、 Preparatory work before the upgrade
Recorded all the ADC and the white balance data of all the message source in factory menu before
upgrade(FLASH initialization may occur after the upgrade, flush color calibration data, then restore the data you
have been recorded):
1. In the condition of YPbPb message source, press the MENU button after appear the main menu, then
followed by 1147
enter the next level menu, move the cursor to the MODE item, press the left / right Moving button and
move the cursor selection in YPbPr (SD)item, record the R-GAIN/G-GAIN/B-GAIN value and
R-OFFSET/G-OFFSET/B-OFFSET value.
2. In the ADC ADJUST item, press OK key to enter the next level menu, move the cursor to the MODE item,
press the left / right cursor keys to select YPbPr (HD) item, record R-GAIN/G-GAIN/B-GAIN value and
R-OFFSET/G-OFFSET/B-OFFSET value.
3. Operations and procedure of software upgrading:
3.1. Changed the file name to "MERGE.bin", then stored software in the FAT32 format blank U disk.
3.2. Insert USB flash disk into the USB upgrade port, upgrade the software according to the following the operating
instructions:
press MENU key on remote controller , press left or right key switching to OPTION after prompting to the next menu, then
press up or down key to get into Software Update(USB),

MSD3463 software upgrades (After Service)

number keys to enter the factory menu, select ADC ADJUST item, press the OK key to
Record the R/G/B-GAIN and R/B/G-OFFSET value under the
YPbPr(SD) and YPbPr(HD) mode, to be replaced the recorded value
after the machine software upgrade
press right key or OK key to enter.
22
YPbPr(HD)