Table of Contents
Advertisement
If print quality has declined when you print again, clean and align the print head.
Parent topic:
Related concepts
Purchase Epson Ink Cartridges and Maintenance Box
Print Head Cleaning
Print Head Alignment
Battery Charging
Cleaning Your Product
To keep your product working at its best, you should clean it whenever necessary. Close the cover when
you are not using the product to protect it from dust.
Caution: Do not use a hard brush, benzene, alcohol, or paint thinner to clean the product or you may
damage it. Do not place anything on top of the product or use the cover as a writing surface, or it could
get permanently scratched. Do not use oil or other lubricants inside the product or let water get inside.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
4. Remove all the paper.
5. Clean the outer case and control panel with a soft, dry cloth. Do not use any liquid or chemical
cleansers.
Parent topic:
Transporting and Cleaning Your Product
Transporting and Cleaning Your Product
143
Advertisement
Table of Contents
