Clockaudio CUI-2 User Manual

This guide is intended to help you
get started with the CUI-2 quickly.
It is not a substitute for the full
manual which contains detailed
information on the key features.

INSTALLING THE MICROPHONE(S)

The CUI-2 is designed to work
with mono or stereo microphone
installations.
Consult your ClockAudio
microphone user manual for best
practices related to installing your
microphone.
MIC INPUT
Connect the
microphone(s)
to the included
MIC INPUTS
mic input
FEMALE XLR
(connector side)
terminal block.
NOTE: Use Input 1 for mono
microphone installations.

INSTALLING A TOUCH SWITCH

A Clockaudio Touch Switch can
be used with the CUI-2 to mute
microphones.
POSITIVE (+) GROUND ( )
Connect a Touch Switch to the TS
NEGATIVE (-)
POSITIVE (+) GROUND ( )
Port on the CUI-2 with a standard
CAT5 cable. NEGATIVE (-)

CONNECTING TO USB

Connect the USB port to a PC or
MAC with the supplied USB cable.
The CUI-2 is plug and play, special
drivers are not required.
The CUI-2 is also powered by the
1 2 3 4 5 6 7 8 9 10
ON
USB connection. An optional 12V
power input is also provided.
MIC INPUT
MIC INPUT

MOUNTING THE CUI-2

MIC INPUTS
MIC INPUTS
FEMALE XLR
(connector side)
MIC INPUT
MIC INPUT
Using the supplied screws, attach
MIC INPUTS
MIC INPUTS
FEMALE XLR
the CUI-2 to a fl at surface, usually
(connector side)
the underside of a desk or
conference table.
INSTALLING THE CUI-2
3.35"
1.44"
3.35"
1.38"
1.44"
1.38"
0
0
5.07"
MOUNTING 4.625"
5.07"
MOUNTING 4.625"
4.00"
4.00"
1 2 3 4 5 6 7 8 9 10
QR CODE ON
Scan the QR
code to go
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
ON ON ON
directly to the
CUI-2 Product
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
ON ON ON ON
Page with
detailed User
Guide.
CUI-2 QUICK START
4
1 2 3 4 5 6 7
ON
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
ON ON
1 2 3 4 5 6 7 8 9 10
ON