Campvalley 30658 Quick Start Manual

10' X 10' SIMPLE PUSH STRAIGHT LEG CANOPY
For more in-depth videos, setup demonstrations and product information,
please visit www.Walmart.com
Before you begin
Read all instructions thoroughly before beginning set up.
• Select a level site clear of rocks, branches and other hard or sharp objects, to set up your shelter.
WARNING: Keep clear of overhead power lines.
• Do not set up your shelter under trees because of potential lightning strikes or falling tree limbs in
inclement weather.
• Secure with all stakes and guylines provided to prevent property damage or personal injury.
• Two people can easily setup this shelter in minutes.
(1) Simple Push
Frame
(1) Canopy
(1) Stake Bag
(8) Steel Stakes
(1) Carry Bag
STITCH LINE
SET UP
1
PARTIALLY EXTEND FRAME
With two people pulling from opposite corners,
partially extend the frame.
3
EXTEND LEG POLES TO DESIRED HEIGHT
Grasp and extend telescoping leg poles until the
silver locking buttons "click" into locked position.
LOCKING
BUTTON
3-Stage Height
Adjustability
LOWEST
MEDIUM
HIGHEST
5
SECURE CANOPY TO FRAME
Wrap hook & loop fasteners on underside of
canopy around metal braces to secure.
HOOK & LOOP
FASTENER
(See other side for Take Down Instructions)
VSN: WMT-1010112P
Model No. 30658
2
DRAPE CANOPY OVER FRAME
Press the hook and loop pads located at each corner
onto frame.
4
RAISING ROOF SUPPORT BRACKETS WITH
SIMPLE PUSH
Push Simple Push handle up until support brackets
lock into place.
6
STAKE SHELTER & GUYLINES
Drive stake through hole in each leg pole foot.
Stake each guyline then tighten and adjust with slider.
METAL
BRACE
FOOT
STEEL HOOK & LOOP
SHELTER LEG FASTENERS
UNDERSIDE
OF CANOPY
SUPPORT
BRACKETS
SIMPLE PUSH
HANDLE
SLIDER