Download Print this page

TECHWOOD TMP-8241 Instruction Manual page 5

Advertisement

Always place the unit on a flat surface. Ensure, also, not to
cover the device and not to put anything on it.
Always remove the plug from the wall socket when the
appliance is not in use.
When using an extension lead always make sure that the
entire cable is unwound from the reel. Use solely CE
approved extension leads. Input power must be at least 16A,
250V, 3000W.
Incorrect operation and improper use can damage the
appliance and cause injury to the user.
This device, designed for home use, complies with standards
relating to this type of product.
(*) Competent qualified person: after sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs
SPECIAL WARNING FOR STICK BLENDER
Caution !
● Always disconnect from power supply if it is left unattended
and before assembling, disassembling or during cleaning.
● Switch off the appliance and disconnect from supply before
changing accessories approaching parts that move in use.
● Potential injuries can occur with misuse. Care shall be taken
when handling the sharp cutting blades, emptying the bowl
and during cleaning, as they are extremely sharp.
● Regarding the instructions for cleaning surfaces in contact
with food or oil, thanks to refer to the below paragraph
"cleaning and maintenance" in manual.
● Regarding the instructions for the use of accessories,
operation times and speed settings, refer to the below
paragraphs.
5

Advertisement

loading