Front Panel Overview - Adcom GDV-870 User Manual

Front Panel Overview

The following is an overview of the GDV-870 front panel.
� � � � � � �
�������
������������ ����� ��������
1 Standby button
Powers the GDV-870 on and off (Standby mode).
• The rear panel power switch must be in the
on position (|) for this button to function.
• The Power LED is amber when the unit is in
Standby mode.
• The Power LED is red when the unit is on.
2 Status Indicators
Provides a quick visual cue that one or more
of the following conditions are active:
Video Mute - Activated by pressing the
•
Vid. Off button on the remote control
during CD playback.
Progressive Scan - Activated by setting
•
Video Out to P-Scan in the Setup Menu.
• Digital Out - Activated by pressing the
Dig Audio Out On button on the remote
control.
HDCD - Activated by loading an HDCD-en-
•
coded disc.
• DVD Audio - Activated by loading a DVD
Audio disc.
3 Front panel display
Displays GDV-870 status information.
www.adcom.com
� � � � � � � � � � � � � �
4 Stop button
Stops disc playback.
• Press the Stop button once to stop and
hold playback at the current position.
• Press the Stop button twice to reset play-
back to the beginning of the disc.
5 Play button
Starts disc playback.
• Pressing the Play button in Standby mode
powers on the player.
6 Pause button
Pauses disc playback.
• Pressing the Step button in Pause mode
advances the picture one frame at a time.
7 Disc Tray
Use to load/unload discs.
• Press the Eject button on the front panel or
remote control to open/close the disc tray.
8 Eject button
Opens and closes the disc tray.
9 Skip Prev/Next buttons
Skips to the previous or next chapter (or track)
during disc playback.
���� ���� �����
�����
�������������� �������������
GDV-870 Owner's Manual
7