Placing The Gdv-870; About The Remote Control - Adcom GDV-870 User Manual

Placing the GDV-870

Place the GDV-870 on a stable, vibration-free sur-
face away from moisture and out of direct sunlight.
Your Adcom dealer will be pleased to show you many
different types of audio/video equipment racks and
cabinets.
Be sure to leave sufficient room behind the rear
panel to accommodate cables, power cords, etc. We
recommend a minimum of 5 inches of free space for
maximum flexibility.
A distance of 1/2" should be maintained around the
GDV-870 for ventilation. Keep your GDV-870 in a
room where temperatures remain fairly moderate,
and never cover it with table cloths, curtains, news-
papers, etc., to avoid potential overheating.
6 GDV-870 Owner's Manual

About the Remote Control

The GDV-870 comes with a full-featured, prepro-
grammed, ergonomically designed remote control.
• For an overview of each remote button, see
page 8.
Inserting the Remote Batteries
1 Remove the cover on the back panel of the re-
mote control.
2 Insert two AAA alkaline batteries, paying atten-
tion to the correct polarities.
3 Replace the cover.
Insert two AAA batteries,
paying attention to
the correct polarities.
Use within 20 ft. (6m)