Advertisement
How to replace the Magoo coil head and wick
1. First you must make a single coilhead with a wick. For this you need to buy:
- Kanthal thread
- Silica wick
From ISmoka you can buy this as a Magoo coil and wick kit.
The silica wick is the "cotton"
string which is used to deliver
the liquid to the coil head.
The coil thread is made of
kanthal thread and can have
different ohm resistance
depending on the thickness
of the thread.
Advertisement
Table of Contents
Related Manuals for ismoka Magoo
Summary of Contents for ismoka Magoo
- Page 1 1. First you must make a single coilhead with a wick. For this you need to buy: - Kanthal thread - Silica wick From ISmoka you can buy this as a Magoo coil and wick kit. The silica wick is the “cotton” string which is used to deliver the liquid to the coil head.
- Page 2 Wrap the kanthal thread on the middle of the two silica strings for several laps. This will create the coil head. It’s important to leave enough length of the silica strings in both ends to reach the bottom of the atomizer head. Then your delivery string is done.
- Page 3 ☺ If you have a dual coil Magoo atomizer head the only difference is that you have four slots on the top of part A. You simply place one delivery string in each slot, and follow the same...
Need help?
Do you have a question about the Magoo and is the answer not in the manual?
Questions and answers