Advertisement
12. Check the following items to be sure that the unit is connected correctly to FX mode.
a) From the menu bar, select [Main], then left-click.
b) Select [Status Monitor], then left-click. A screen similar to the one shown below appears.
(FX)
Communication status
- Data Connection: "(FX)" is added to the end of the indication.
- Data size: Shows the data size for the connected PC's group packets.
- Connection: This indication, normally shown directly below [Data size], is hidden.
c) From the menu bar, select [Main], then left-click.
d) Select [Data connection], then left-click. A screen similar to the one shown below appears.
- The screen title has "(FX mode)" added to the end.
- The label column of the table has "FX" added to each entry.
3
Advertisement
