Advertisement
Post
1
• Position the zebra upside-down.
• Fit the tube end of a foot into one of the holes inside
the post.
• Assemble the other five feet into the post.
2
• Fit the cap into the center of the post.
Assembly
Foot
Cap
3
• Insert six screws into the cap and tighten.
• Turn the assembly upright.
4
• Fit and "snap" each base piece between the spaces in
the feet.
Hint: The base pieces are designed to be asssembled to any
of the openings between the feet, and is a one-time assembly.
3
Base Piece
Advertisement
