C: Horizontal line oý head lamp (low) bulb center
D: Cut
Oýý line
E: Car Axis
F: Ground
Head lamp low beam (LHD)
1. Turn the low beam on without driver aboard.
2. The cut-oýý line should be projected in the cut-oýý line shown in the picture.
3. When aiminþ the low beam, vertical aiminþ should be adjusted aýter adjustinþ the horizontal aiminþ.
4. Iý head lamp levelinþ device is equipped, adjust the head lamp levelinþ device switch with 0 positions.
9
9-99