Related Manuals for CNP Brands childcare Osmo 044291
Summary of Contents for CNP Brands childcare Osmo 044291
- Page 1 Osmo High Chair Model # 044291 IMPORTANT! RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING BEFORE ASSEMBLING THIS HIGH CHAIR, READ AND UNDERSTAND THE INSTRUCTIONS. Follow the manufacturer’s instructions Do not leave children unattended. The harness must always be used and correctly fitted - most injuries from high chairs are caused by falls. - Page 3 Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction manual are generic, therefore product fabrics, colour and design may vary from images shown. CNP Brands reserves the right to alter product specifications without notice as a result of our ongoing policy of product improvement.
-
Page 4: Assembly Contents
You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000. Supplied loose in box:... - Page 5 ASSEMBLY CONTENTS Supplied loose in box continued: 65mm Bolts Adjustable Feet Allen Key There are no accessories recommended for use with this Childcare Osmo High Chair.
- Page 6 ASSEMBLY / OPERATING INSTRUCTIONS To assemble High Chair... Lay chair face down. Align the Seat Brace with the assembly holes on the Seat Base. Ensure the shorter bracing mould ends are at the bottom of the Seat, as they are for the front legs. Connect Seat Bracing to Seat Shell Base via 4 x 65mm Bolts.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To assemble High Chair continued... Repeat for remaining Rear Leg. Insert 1 x Adjustable Foot per leg. Tighten until secure. Stand chair upright. Adjust feet to ensure all 4 legs rest on the floor evenly.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble High Chair continued... 10a. Insert Footrest into mounting holes on Front Legs. 10b. Secure using 2 x Footrest Bolts. Align Tray with slots on front of seat shell. 11a. 11b. Pull levers on either side of tray and slide tray along slots until it ‘clicks’...
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Tray... This Tray has 3 adjustable positions. To adjust Tray, pull tray adjustment latches on both sides of Tray and slide forward or backward to desired position. Release the tray adjustment latches, ensuring Tray ‘clicks’...
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To use Harness Restraints... To secure child in harness, push buckle (a) and (b) into the buckle housing (c) until the buckle prongs snap into position. Carefully adjust the harness by pulling the slider (d) until the desired fit is achieved in the lap, shoulder and crotch strap.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS To remove Seat Pad... Remove the Tray. Undo the harness buckle. Remove the shoulder clips from the waist straps. Remove the shoulder pads and then feed the shoulder harness straps back through the current slots in the Seat Pad. Repeat the above step for the waist straps and the crotch strap.
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Seat Pad... Place the Seat Pad onto the Seat. Feed the crotch strap up through the corresponding slot in the Seat Pad. Repeat the above step for the shoulder and waist harness straps. Attach shoulder strap clips to waist strap clips. Engage the harness buckle.
- Page 13 ASSEMBLY / OPERATING INSTRUCTIONS To remove Harness for cleaning... Remove the two D-rings from the end of the Harness Strap by sliding the webbing through the slot in the D-ring. Push strap end through the slot in the seat and remove Harness.
-
Page 14: Maintenance
Use only those parts and accessories approved by CNP Brands. If you have any difficulties in assembling the high chair, please contact our Service Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000. - Page 15 ABOUT US About CNP Brands Currently, CNP Brands boasts one of the most diverse brand portfolios with a combination of company owned brands and distribution agreements. These include distribution lines for Evenflo, Good Baby, Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo.
- Page 16 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 82 Maribyrnong Street, Footscray, VIC, 3011 Distribution Customer Service 1300 667 137 2-6 Argyle St, Morningside, PO Box 41-014, W: www.cnpbrands.com.au St Lukes, Auckland, New Zealand E: info@cnpbrands.com.au Customer Service: 0800 567 5000 F: www.facebook.com/CNPBrands...
Need help?
Do you have a question about the childcare Osmo 044291 and is the answer not in the manual?
Questions and answers