Advertisement
Optional accessories
For a list of optional accessories, see the online User's Guide.
You can purchase accessories from an Epson authorized reseller. To find the
nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online
at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian
sales).
Notices
Wireless product safety instructions
Contains Bluetooth
®
module model: DBUB-E207
Streaming Media Player model: STI6110-D101(RoHS)
Remote controller model: WH-55, WH-5674
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance.
This device is restricted to indoor operations only.
WARNING:
•
This product may exert electromagnetic interference on, and cause malfunction of,
cardiac pacemakers. Before using this product, check that there is no one in the
vicinity using a cardiac pacemaker.
•
This product may exert electromagnetic interference on, and cause malfunction
of, sensitive medical equipment. Before using this product, check that there is no
sensitive medical equipment in the vicinity.
•
Do not use the wireless communication function near automatically controlled
devices such as automatic doors or fire alarms. The electromagnetic waves may
cause electromagnetic interference with equipment or cause the equipment to
malfunction.
Data transmission is always initiated by software, which is then passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several
special packets are initiated by the MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinues transmission in
case of either absence of information to transmit or operational failure.
U.S. FCC Notices
Contains FCC ID: BKMAE-E207
FCC ID: BKMAE-STI6110
FCC ID: BKMAE-WH55
FCC ID: BKMAE-WH5674
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. Properly shielded
and grounded cables and connectors must be used for connection to host computers and/
or peripherals in order to meet FCC emission limits.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This
equipment should be installed and operated with a distance of at least 7.9 inches (20 cm)
between the radiator and your body (except for the Bluetooth remote controller model
WH-55 or WH-5674).
Industry Canada (IC) Notices
Contains IC: 1052D-E207
IC: 1052D-STI6110
IC: 1052D-WH55
IC: 1052D-WH5674
CAN ICES-3 (B)/NMB-3 (B)
This device complies with Industry Canada's license-exempt RSSs. Operation is subject
to the following two conditions: (1) This device may not cause interference; and (2) this
device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated with a distance of at least 7.9 inches (20 cm)
between the radiator and your body (except for the Bluetooth remote controller model
WH-55 or WH-5674).
Supplier's Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers:
We:
Epson America, Inc.
Located at:
3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
Telephone:
(562) 981-3840
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR §2.906. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name:
Epson
Type of Product:
LCD Projector
Model:
H956A
Marketing Name:
LS500WATV/LS500BATV
Epson America, Inc. Limited Warranty
Two-Year Projector Limited Warranty
A. What Is Covered: Epson America, Inc. ("Epson") warrants to the original retail
purchaser of the Epson projector product enclosed with this limited warranty
statement that the product, if purchased new and operated in the United States,
Canada, or Puerto Rico, will be free from defects in workmanship and materials for a
period of two (2) years from the date of original purchase. For warranty service, you
may be required to provide proof of the date of original purchase.
B. What Epson Will Do To Correct Problems: If your product requires service during the
limited warranty period, please call Epson at the number at the end of this statement
and be prepared to provide the model, serial number, and, if required, date of
original purchase. If Epson confirms that warranty service is required, Epson will, at
its option, repair or replace the defective unit, without charge for parts or labor. If
Epson authorizes an exchange for the defective unit, Epson will ship a replacement
product to you, freight prepaid, so long as you use an address in the United States,
Canada, or Puerto Rico. You are responsible for securely packaging the defective unit
and returning it to Epson within five (5) working days of receipt of the replacement.
Epson requires a debit or a credit card number to secure the cost of the replacement
product in the event that you fail to return the defective one. If Epson authorizes
repair instead of exchange, Epson will direct you to send your product to Epson or its
authorized service center, where the product will be repaired and sent back to you.
You are responsible for packing the product and for all postage or shipping costs to
and from the Epson authorized service center. When warranty service involves the
exchange of the product or of a part, the item replaced becomes Epson property.
The exchanged product or part may be new or refurbished to the Epson standard of
quality. If service cannot be provided on the product for any reason and Epson no
longer sells the same model, Epson will replace your product with a model of equal or
superior value. Replacement products or parts assume the remaining warranty period
of the original product.
C. What This Warranty Does Not Cover:
1. Any damage caused by misuse, abuse, improper installation, neglect, improper
packing or shipping; disasters such as fire, flood, or lightning, improper electrical
currents, software problems, or interaction with non-Epson products
2. Any damage caused by, or any service for, third-party software, applications, parts,
components, or peripheral devices added to the product after its shipment from
Epson, such as dealer or user-added boards, components, or cables
3. Any damage caused by installing the product next to a heat source, or directly in
the path of an air vent or an air conditioner
4. Excessive continual use
5. Consumables such as filters
6. Installation or removal
7. Cosmetic damage caused by handling, or normal wear and tear during usage
8. Damage caused by failure to properly maintain the projector (see your online
User's Guide for details)
9. Damage resulting from operation in areas with smoke, oil, high humidity, dust, or
excessive vibration
10. Damage caused by interaction with non-Epson products, such as add-in cards or
cables
11. Service when the projector is used outside of the U.S., Canada, or Puerto Rico
12. Service if the product label, logo, rating label, or serial number has been removed
13. Any problem resulting from service by other than Epson or an Epson Authorized
Servicer.
This warranty is not transferrable. Epson is not responsible for your data or
applications, which cannot be restored and should be backed up by you. Postage,
insurance, or shipping costs incurred in presenting your Epson product for carry-in
warranty service are your responsibility. If a claimed defect cannot be identified or
reproduced in service, you will be held responsible for costs incurred.
Advertisement
