Download Print this page

Epson LS500WATV Quick Setup page 2

Hide thumbs Also See for LS500WATV:

Advertisement

4
The default language of the menu system is English. To select another
language, press the
Menu button on the projector or the projector
remote control. Select Extended and press Enter. Select Language and
press Enter. Select your language and press Enter. Press the
button to exit.
Note: To shut down the projector, press the
or the projector remote control, then press the button again to confirm, if
necessary.
Adjust the image
1
To adjust the image position, move the projector in the appropriate
direction while keeping it level and parallel to the screen. You can also
extend or retract the front feet to correct vertical distortion, if necessary.
2
Move the focus lever at the front of the projector up or down to adjust
the image sharpness.
3
If the image shape still requires adjustment, press the
on the projector or the projector remote control and select Settings >
Keystone > Quick Corner. Use the arrow and Enter buttons to adjust
each corner. Press the
Menu button to exit the menu.
Note: For other image adjustments, see the online User's Guide.
Using the projector remote
control
Install the batteries as shown (two AAA batteries).
Turn projector on or off
Connect to video-on-
demand apps
Go back to previous
function
Enter a selection
Access projector menus
Turn volume up or down
Control playback of
connected device
Menu
power button on the projector
Menu button
Microphone
Turn off audio and
video temporarily
Display the Android TV
home screen
Navigate menus
Change input source
Operate Android TV features
using voice commands
Adjust image shape
(keystone)
Note:
• You must pair the projector remote control to the included streaming device
to use Android TV and video-on-demand features. See the online User's Guide
for more information.
• The remote control for Android TV is only used to control the streaming
device if it is connected to a different device or projector. See the online
User's Guide for more information.
Troubleshooting
If you see a No Signal message after turning on the projector, check the
following:
Make sure the streaming device is properly connected to the HDMI
extension cable and the USB power cable.
For external video sources, make sure an HDMI cable is properly
connected to one of the projector's HDMI ports.
If you see a blank screen, check the following:
Make sure the lens cap is removed.
Make sure the
power light on the projector is blue and not
flashing.
Press the
power button to wake the projector from standby or
sleep mode, if necessary.
If you see a blank screen when a computer is connected, check the
following:
On some Windows
®
laptops, you may need to hold down the Fn key
and press F7 or the function key that lets you display on an external
monitor. It may be labeled CRT/LCD or have an icon such as
On Windows 7 or later, hold down the Windows key and press P at
the same time, then click Duplicate.
If you're using a Mac laptop, open System Preferences and
select Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
If the projector does not respond to remote control commands, make sure
the batteries in the remote control are installed correctly. Replace the
batteries if necessary.
The projector's USB power cable can provide 2.0A of power. Make sure
your streaming device supports this specification.
Registration
Register today to get product updates and exclusive offers. You can register
online at www.epson.com/webreg.
Where to get help
Manual
For more information about using the projector, you can view or download the
online manual from the Epson website, as described below.
Internet support
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada)
and search for your product for solutions to common problems. You can
download utilities and documentation, get FAQs and troubleshooting advice,
or e-mail Epson.
Telephone support services
To use the Epson
PrivateLine
Support service, call (800) 637-7661. This service
®
®
is available for the duration of your warranty period. You may also speak with a
support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6
to 8
, Pacific Time, Monday through Friday, and 7
am
pm
to 4
, Pacific Time, Saturday. Days and hours of support are subject to change
pm
without notice. Toll or long distance charges may apply.
.
am

Advertisement

loading

This manual is also suitable for:

Ls500batv