Group Management - Microgate RACETIME 2 Manual

RACETIME 2 – Program "Parallel Slalom"
A:Ent./edit groups
B:Clear groups
C:Print groups
A B
Gruppo N.
fr. to
(0 to end input)
Gruppo N.
Scelta N.
fr. 20
(0 to end input)
A:Ent./edit groups
B:Clear groups
C:Print groups
A B
A:Ent./edit groups
B:Clear groups
C:Print groups
Sure? Yes

5. 5. 5. 5. Group management

Group management Group management Group management
C menu
1
1
3
to 28
C menu
No
It is possible to define up to a maximum of 98 groups,
subdivided in turn into 8 subgroups each.
In 'Parallel' mode, the groups are used only for the
calculation of the rankings and are not involved in any
way in real timing.
For the definition of groups, select 'B:Ins./group
printouts' from the main menu (F2) and then 'A:Ins./edit
groups' from the submenu (F1). At this point, suppose
you wish to define the following groups (categories):
Group 1 start numbers from 1 to 10 start number
15 start numbers from 20 to 28
Group 2 not used
Group 3 start numbers from 40 to 50
You must then press the following sequence of keys:
1, Enter, 1, Enter, 10, Enter, 15, Enter, 15, Enter, 20,
Enter, 28, Enter, 0, Enter (end of group 1)
3, Enter (setup of group 3, group 2 is not used)
40, Enter, 50, Enter, 0, Enter, 0, Enter (to quit setup).
You can check the correct setting by selecting "C:Print
groups " (F3) or by viewing the groups you are interested
in with 'A:Ins./edit.groups'.
To delete completely the current setting for groups, select
'B: Delete groups' (F2). To delete one group only, set 0
in choice 1 of the group to be deleted.
9