Panasonic EY7451 Service Manual page 10

4.2.6. Assembly of the Adjusting Screw and the Clutch Handle.
1. Hold the driving block with the click spring on top, and
align the narrow projection of adjusting screw with 45°
right side of the clutch case.
NOTE:
Make sure that the adjusting screw has its own correct
direction for proper assembly. Failure to do so, the clutch
handle does not rotate properly.
2. Turn the adjusting screw into the driving block about one
rotation for clockwise direction.
3. Set the clutch handle with position 1 on top.
(Align the position 1 of clutch handle with the narrow pro-
jection of driving block.)
4. Insert the clutch handle with adjusting the tabs of adjust-
ing screw to the groove of inside clutch handle.
10