Download Print this page

Lekker Bikes Amsterdam+ Installation Manual

Front rack

Hide thumbs Also See for Amsterdam+:

Front rack installation manual -

This step-by-step manual will guide you through the installment of your

LEKKER front carrier on your Amsterdam GT. You will need allen keys

sizes 4mm and 5mm, a crosshead screwdriver and a 8mm wrench.

Please note: For the proper installation of the

front rack, you need to remove the front light from

its original holder and attach it to a longer version

(see picture to the right). This holder is

unfortunately only available from the 2nd week of

August onwards. We will ship you the holder

separately. Once you receive this holder, you can

install the rack and lamp correctly. We

recommend waiting with the installation of your

front rack until you receive this holder!

Amsterdam+

Table of Contents

Need help?

Do you have a question about the Amsterdam+ and is the answer not in the manual?

Page 1 Front rack installation manual - Amsterdam+ This step-by-step manual will guide you through the installment of your LEKKER front carrier on your Amsterdam GT. You will need allen keys sizes 4mm and 5mm, a crosshead screwdriver and a 8mm wrench. Please note: For the proper installation of the front rack, you need to remove the front light from its original holder and attach it to a longer version...
Page 2 Step 1 Using t wo 5mm allen keys , loosen and remove the bolt that runs through the front fork and holds your lamp and fender. You can now remove the lamp from the bolt. Make sure that you do not disconnect the cables.
Page 3 Step 3 Next, re-attach the bolt you have removed in step 1 using the t wo 5mm allen keys . Hook the carrier and the new lamp holder with the mounted lamp onto the bolt before fastening it tightly. Step 3 Now, attach the front carrier stays to the carrier using the provided bolt, nut and washers.
Page 4 Congratulations, You have now successfully installed your LEKKER bikes front carrier and re-located the lamp accordingly. The lamp will shine through the gap of the rack, making you clearly visible while illuminating the LEKKER logo!