Summary of Contents for LEGO Frans Snik VERY LARGE TELESCOPE
Page 1
LEGO VERY LARGE TELESCOPE Building Instructions Design by Frans Snik...
Page 2
The LEGO Very Large Telescope is a challenging but fun build! Although it is a mortal sin against the LEGO philosophy, and the model does stay nicely intact without it, the application of some glue here and there is recommended, particularly to enable frequent handling and transport.
Page 12
Cut off the edges of the four studs on the turntable, to fit the hole of the round plate on top of it. 2 × 2 × 2 × 1 × 2 × 1 × 2 × 2 × 1 × 1 ×...
Page 15
Cut off the edges of the four studs on the turntable, to fit the hole of the round plate on top of it. 2 × 2 × 2 × 2 × 2 × 1 × 2 × 2 × 1 × 1 ×...
Page 151
The dome cannot be mounted directly on top of the telescope assembly. You should first insert the telescope plus instrument platforms through the hole in the bottom, or through the “secret” door on the side (see pages 126, 129, 161, 162). You may need to dismount the Cassegrain instrument first.
Need help?
Do you have a question about the Frans Snik VERY LARGE TELESCOPE and is the answer not in the manual?
Questions and answers