Advertisement
REMOTE CONTROL
GN REMOTE CONTROL
CD-1000 can be controlled completely using only the GN remote, please ensure the CD mode is selected on the remote pressing
CD on the dedicated DEVICE SELECTION button.
VOLUME
use VOL+ and VOL- to adjust the
volume level by 1 step at a time
MUTE
use MUTE to instantly mute the CD-
1000 the input selection is disabled
while CD-1000 is in MUTE
CD
To control CD-1000 selected
the button CD on the remote
control
ENTER
activates the SELECTION FRAME and selects
the functions.
POWER ON/OFF
use POWER ON/OFF to turn ON and OFF
the CD-1000 [the master switch on the
rear panel must be ON]
BALANCE L/R
use L [Left] and R [Right] to adjust
the balance of the volume by 1dB at
a time on each channel
INPUT SELECTION
use IN+ and IN- to change the
selected input.
use IN+ and IN- when the SELECTION
FRAME is red [active selection] to
change the function and set the
desired value
DISPLAY
turns ON and OFF the display
8
Advertisement
