Advertisement
Wells-Gardner Electronics Corporation
FEATURES:
I²C BUS control.
The monitor is designed with I²C BUS control for simplifying the circuitry.
Automatic mode recognition of preset factory modes
No control pots to wear out
SET UP:
Setting up your monitor is easy. All you have to do is make a few simple connections
and adjustments. The procedure is as follows:
START UP:
Your monitor starts up automatically when you insert the power plug to power source.
Signal Cable Connection.
Connect the 15pin-signal cable to the source and lock both screws to ensure that the
monitor is properly grounded.
D type 15pin connector:
PIN NO.
DESCRIPTION
1
2
VIDEO GREEN
3
4
5
6
VIDEO RED GROUND
7
VIDEO GREEN GROUND
8
VIDEO BLUE GROUND
VIDEO RED
VIDEO BLUE
N.C.
N.C.
PIN NO.
DESCRIPTION
9
10
11
12
13
HOR-SYNC
14
15
N.C.
GROUND
N.C.
SDA
VER-SYNC
SCL
Advertisement
