Daikin RKS24HV2S Service Manual page 17

Si001166
Step
4 Disconnect the
connector for the fan
motor [S70].
5 Release the fan motor
lead wire from the 5
hooks.
Disconnect the
6
connectors of the front
side.
Removal Procedure
Procedure
[S70]
[S40] [S20]
[S90]
(R7008)
: When reassembling, do not
use these 2 hooks.
Fan motor
lead wire
(R9468)
[S20]: electronic expansion
[S80]
[S40]: overload protector
[S80]: four way valve coil
[S90]: thermistors
When reassembling, insert
the clamp of the thermistor
ASSY harness into the hole
as below.
(R5275)
When reassembling, insert
the clamp of the electronic
expansion valve coil harness
into the hole as below.
Removal of Electrical Box
Points
valve coil
Thermistor ASSY harness
(R17142)
Electronic expansion
valve coil harness
(R17141)
15