DROMEAS Alma HT Operating Instructions Manual
Working desk
Hide thumbs
Also See for Alma HT:
- Operating instructions manual (12 pages) ,
- Operating instructions manual (9 pages)
Table of Contents
Advertisement
www.dromeas.com
DROMEAS S.A.
Office Furniture Manufacturer
Headquarters
Industrial Area of Serres,
62 121, Serres, Greece
Τ. +30 23210 99220
F. +30 23210 99270
e-mail: dromeas@dromeas.gr
For electric adjustable desk with metallic color RAL 9006
Operating instructions
Alma HT
Alma HC
Height adjustment 650 - 1290mm
Lifting capacity 125kg
Advertisement
Table of Contents
Related Manuals for DROMEAS Alma HT
Summary of Contents for DROMEAS Alma HT
- Page 1 Operating instructions For electric adjustable desk with metallic color RAL 9006 Alma HT Alma HC www.dromeas.com Height adjustment 650 - 1290mm Lifting capacity 125kg DROMEAS S.A. Office Furniture Manufacturer Headquarters Industrial Area of Serres, 62 121, Serres, Greece Τ. +30 23210 99220 F.
- Page 2 These operating instructions are part of the Alma HT/HC working desk. They are valid only as a complete document. This manual should also be included in the case of resale of this office desk. Users of the Alma HT/HC working desk must read and comply with these safety instructions.
-
Page 3: Table Of Contents
Information: Dromeas assumes no liability or warranty for damages and malfunctions resulting from noncompliance with the operating instructions. Further information https://www.dromeas.com/ E-Mail: dromeas@dromeas.gr, info@dromeas.gr T.: +30 23210 99220 Headquarters: Industrial Area of Serres 62121 Serres, Greece T.: +30 23210 99220 F.: +30 23210 99270... -
Page 4: Introduction
Finally, you can find a glossary of relevant concepts as well as the assembly plans attached. Information: Dromeas assumes no liability or warranty for damages and malfunctions resulting from noncompliance with the operating instructions. -
Page 5: Product Description
- Steel sheet ST 37 DCP (cold rolled). - Chipboard P2 of category E1 and ABS 2 mm perimeter edge banding. Certified according to ISO EN-14322. - ABS margin tape and other plastic PP parts. 2.3 Technical data 2.3.1 Working desk Alma HT/HC... -
Page 6: Electrical Parts
Dimensions: DROMEAS catalogue Weight: (see label) 2.3.2 Electrical parts Control and movement Maximum ambient temperature for storage and transport: -10 °C to 50 °C Maximum operating temperature: 5 °C to 40 ° C Maximum storage, transport and operation humidity: 700 to 1060 hPa... -
Page 7: Optimal Desk Height
Maximum power consumption during lifting: -2 telescopic columns per working desk: 200 W Power consumption in standby mode: = 0,1 W Noise emissions < 55 dB 2.4 Optimal desk height Adjusting the optimum desk height is critical for the right work position. Even with the use of an ergonomic office chair, it is necessary to get up for a while. -
Page 8: Environmental Aspects Of The Product
Any other or further use is considered inappropriate use. In the event of inappropriate use, Dromeas assumes no responsibility for any damages that may occur and no warranty for the faultless and functional operation of the parts. The intended use also includes... -
Page 9: Unpackaging And Disposal Of Packaging Material
DANGER: Contact with electrical voltage can cause serious injury or death! Unplug or insert plug connections only when there is no voltage Do not attempt to open the enclosures of the following items: controller, lifting units, control lever Metal parts of the work desk may have a high voltage and cause damage to cables and connections Do not ground electrical equipment on the desk frame WARNING: Risk of crushing! -
Page 10: Assembly And Installation
3.3 Assembly and installation Dromeas recommends that the installation be made by a specialist representative or an assembly company. For correct assembly, please refer to the assembly drawing (see attachment). It is necessary to check the electrical equipment of the working desk. The installation should be carried out by 2 technicians in an area of at least 3 m x 3 m. - Page 11 The “smart” handset Bluetooth® Smart Control lets you make the most of your desk! It features Bluetooth® wireless technology that lets you connect the desk with your device, a display, 4 memory slots, and an LED color stripe that is used position switch reminders. Log in to Desk Control ™...
- Page 12 You can decide how often you want the desk to remind you to change positions. You can either accept predefined reminders or enter your own time intervals. Set the reminder time To adjust the length of time that tells you how often you are reminded of a position change, press the "Bell"...
-
Page 13: Memory Controller (Optional Equipment)
the desk stops. Automatic operation: Automatic memory positioning enabled: Lift up or press down the control key twice to automatically switch between stored height positions. To stop the movement of the surface, simply push or lift it again. 3.5.2 Memory controller (optional equipment) Pressing the "up"... -
Page 14: Reset Procedure
4. Release the "down" key. The desk is ready for use! 3.6 Collision tracking The Alma HT/HC desk is equipped with a modern collision detection system. Thanks to the advanced protection system, even the smallest office disturbance is recorded when up and down. -
Page 15: Disassembly
maintenance. Other maintenance work must only be carried out by authorized specialist personnel. A five year warranty is given for good operation. With regard to electrical components, a two-year warranty is provided. CAUTION: Moisture may damage the control unit and the control unit! Keep the controller and control unit away from moisture and water 3.8 Disassembly Disassembly must be carried out by qualified personnel. -
Page 16: Glossary
The product is designed to minimize the impact on the environment during its life cycle. All its parts, which are made of plastic, metal and wood, are recyclable. On the other hand, replacing parts of the product is easy if there is wear, so the product is not totally rejected. If the product is ultimately disassembled and disposed of, please: 1. - Page 17 Lifting units: the vertical lifting columns that support the surface Control unit: a device located beneath the desk surface to power and synchronize the lifting units Traverse: The metal accessory that connects the two lifting units to each other...
Need help?
Do you have a question about the Alma HT and is the answer not in the manual?
Questions and answers