Table of Contents
Advertisement
Page
GWM Installation manual
2
Declaration of incorporation in accordance with the European Machinery
Directive 2006/42/EC, Annex II, No. 1B
DE GIER B.V.
WESTLANDSEWEG 9
NL-2291 PG WATERINGEN
THE NETHERLANDS
We hereby declare that pursuant to article 2G the following partly completed machines are exclusively
intended to be integrated into or mounted in another machine or piece of equipment:
Motor: GWM15 / GWM30 / GWM45
The specific technical documents pursuant to annex VII B have been drawn up and shall be sent on request by
post to the national authorities.
This partly completed machine is compliant with the provisions of the following European directives:
European Machinery Directive 2006/42/EC
European EMC Directive 2004/108/EC
The following harmonised standards (or parts of these standards) have been applied:
EN ISO 12100-1, -2: 04/2004
Safety of machinery: Basic terms, general design principles
EN ISO 14121-1:12/2007
Safety of machinery: Risk assessments
EN 60204-1:06/2007
Safety of machinery: Machinery electrical equipment
EN 60034-5:09/2007
Rotating electrical machines (only electric motors)
This partly completed machine may only be commissioned if it has been established that the machine into
which this partly completed machine needs to be built satisfies the provisions of the machinery directive.
Authorised compiler of the technical documents:
Rob Sandberg
Managing Director De Gier B.V.
Wateringen, 12-01-2018
De Gier B.V., Westlandseweg 9, 2291 PG WATERINGEN, THE NETHERLANDS, Tel. +31 (0)174 292089, Fax +31 (0)174 295644.
Advertisement
Table of Contents
