Troubleshooting 2 Blinks Failure (1 Of 2) - Panasonic G20 Series Troubleshooting Handbook

Troubleshooting 2 Blinks Failure (1 of 2)

Cautions: Disconnect the AC Power prior to making any disconnection or connection.
If the power LED continues to blink even after the TV is unplugged, press and hold the power switch on the TV for a few
seconds until the LED turns off.
When taking voltage reading, place the voltmeter probe at the test point, component, or connector's pin indicated before
connecting the TV to the AC line. This will ensure voltage reading accuracy before the TV shuts down. (Since the TV is
shutting down, expect the voltage to only come up a couple of seconds.)
Check connections between P6 on
the P board and A6 on the A board.
P6/A6 connection
TC-P42G25
TC-P46G25
TC-P50G20 TC-P50G25
TC-P54G20 TC-P54G25
Slide 20