Xerox 8010 Hardware Reference Manual page 19

XEROX 8010 INfORMATION SYSnM
3. Attach the two interconnecting harnesses to the portable
disk drive box. (This connects the disk drive unit to the
processor. The cables have round connectors that allow
them to fit only one way. Turn the outer ring two or three
times to secure the connector in place.)
4. Power the SID disk drive on. You can now boot the
processor by pressing the B RESET button.
Removing a portable fixed-disk drive from a processor
To remove a SID portable fixed-disk drive:
1. Power the SID disk drive off. (You can power off the disk
drive unit with the workstation processor still on.)
2. Power down the workstation.
CAUTION: Do not pick the disk drive unit up while the power
is on. If you pick up the disk drive before it completely stops,
you may lose data.
3. Detach the interconnecting harnesses.
4. Use the two rigid handles to remove the disk drive unit from
its tabletop or desktop baseplate.
5. Carefully carry the disk drive unit to its secure storage area.
VP SERIES REFERENCE LIBRARY