Main LED Indicator Understand Your Irrigation System The Yardian Installation • Step 1 Replace your old controller • Step 2 Install your Yardian controller • Step 3 Download the Yardian app • Step 4 Pair your Yardian to your profile...
Step 5 Set up the Internet connection ◦5-A Ethernet connection ◦5-B Wi-Fi onboarding ▹For Android users ▹For iOS users Setup of the Yardian App • Home • Control • Yard • Program How to Use Apple Home App to Control Yardian...
What’s in the Box 1. Yardian Pro, the controller Yardian must be connected to the power adapter included. 24VAC, Max. 1A Output Operating -22°F to 140°F (-30°C to 60°C) Temperature 2. Power adapter 100 – 240VAC, 50 – 60Hz Input 36VDC, 1.66A...
Page 5
- - - - - - - - - - - - YID : Input 36VDC, 1.66A Output 24VAC, Max. 1A -- ------ ------- www.yardian.com | Made in Taiwan Product label 24VAC M 1 2 3 4 5 6 7 8 9 10 11 Power supply port Ethernet port USB port...
24VAC, Max. 1A -- ------ ------- • Click Select on the top to specify a zone in Zone Selection Mode www.yardian.com | Made in Taiwan (LED in green). Zone Selection Mode • Press/hold Select for over 1 second to switch between 24VAC...
- - - - - - - - - - - - - - - - Input 36VDC, 1.66 Output 24VAC, Max www.yardian.com | Mad Wi-Fi Reset Button 24VAC Reset Wi-Fi M 1 2 3 4 5 6 7 8 9 Press and hold for around 5 seconds, release when the LED is blinking green and blue.
The Yardian Installation Set up your Yardian in a few easy steps The Yardian should be mounted less than 6.5 feet (2 meters) from the floor for easier accessibility.
S te p Replace your old controller Take a picture of your current wiring. This will help you identify the correct sequence of wires. Exposed sprinkler wires with 24VAC could generate an electric WARNING shock in wet locations. Please ask your retailer or contractor if Electrical Hazard sprinkler accessories may be needed.
Page 13
Disconnect your old controller and remove sprinkler wires. Adhere a numeric labeling sticker to tag each associated wire for easy identification. Remove your old controller from the wall. •Zones - wires connected to zone valves •Common - common wire or ground wire •Rain Sensor - optional •Master Valve - optional Zones...
Page 14
S te p Install your Yardian controller Open the top cover. Mount your Yardian to the desired location. HERE Place your thumb on the top right corner to make it easier to open the cover.
Page 15
Step 1 Mark the wall for the screws. Mount the Yardian with the screws. Model: PRO1900 FCC ID: 2AS9BYP1 - - - - - - - - - - - - Connect sprinkler wires according to the corresponding labels. A1B2C34D...
Page 16
- - - - - - - - - - - - Input 36VDC, 1.66A Output 24VAC, Max. 1A -- ------ www.yardian.com | Made in Taiwan ------- 24VAC M 1 2 3 4 5 6 7 8 9 10 11 Ensure to connect the power cord to a socket-outlet with earthing...
Page 17
Step 2 Close the top cover. PRESS HERE CAUTION This product contains CR1225 battery. Risk of explosion if the battery is replaced by an incorrect type...
Page 18
S te p Download the Yardian app Create an account. Sign in the Yardian app with your account. 2:00 PM iOS 9.0+ and Android 5.0 Lollipop®+...
Step 3 Enter your profile name and locate your Yardian. 2:00 PM Add Profile Profile Name Profile Name Yardian location settings will help to get the weather information Locate Your Yardian with accuracy. Locate Country...
S te p Pair your Yardian to your profile Select the Yardian device settings card to start pairing. Enter the 8-digit Yardian ID (YID) on the device. 2:00 PM 2:00 PM Yardian Pairing My Yardian Yardian Device Settings Please Enter Your YID:...
S te p Set up the Internet connection Yardian is now paired to your profile. Next, set up the Internet connection for Yardian. You can choose to use an Ethernet connection (see Step 5-A) or a Wi-Fi connection (see Step 5-B).
S te p Ethernet connection Connect the Ethernet cable to Yardian. Connect the other end of the Ethernet cable to an open port on your router. Ethernet Cable Model: PRO1900 FCC ID: 2AS9BYP1 - - - - - - - - - - - -...
Page 23
Step 5-A Check your Yardian LED: if it turns into solid blue, it means that Yardian has successfully connected to the Internet. Congratulations! You have completed the setup process for your Yardian. WARNING Software may be updated when Yardian is connected to the Internet.
S te p Wi-Fi onboarding Please stay close to the Yardian device when doing "Wi-Fi onboarding". The Yardian app will automatically lead you to the "Wi-Fi onboarding" 2:00 PM process. If it does not, please select My Yardian the Yardian device settings card and go to "Wi-Fi onboarding".
Page 25
Step 5-B Check Yardian’s LED status. Yardian should be in Wi-Fi AP mode to proceed (LED blinking green and blue). If your Yardian is not blinking green and blue, please press and hold the Wi-Fi reset button for around 5 seconds until the LED blinks green and blue.
Page 26
Step 5-B Wi-Fi connection process may vary depending on the operating system, please follow the instructions based on the operating system of your mobile device. For Android users p.27 For iOS users p.31...
Step 5-B For Android users 2:00 PM Wi-Fi Onboarding Please allow the Yardian app to access the device’s location to get Please Note a list of available networks. Yardian can be connected to your Wi-Fi router to access Internet through Wi-Fi onboarding.
Page 28
Input 36VDC, 1.66A the in-app instructions to complete Output 24VAC, Max. 1A www.yardian.com | Made in Taiwan 24VAC Please Select Your Wi-Fi Router M 1 2 3 4 5 6 7 8 9 10 11 the configuration. My Wi-Fi Router...
Page 29
Step 5-B 2:00 PM My Yardian Check the Yardian status: if it Yardian Device Settings shows “Online”, it means you have successfully connected your YID: A1B2C34D Yardian to the Internet. Online Standby Mode: Stop All Watering Activities Watering Schedule 2021-06-07 : Smart °C |...
Page 30
Step 5-B Congratulations! You have completed the setup process for your Yardian. WARNING Software may be updated when Yardian is connected to the Internet. Please DO NOT turn off the power when the LED is blinking RED. Interrupting the software update process may...
Step 5-B For iOS users 9:00 Wi-Fi Settings This step will help to build your Yardian Wi-Fi as an Apple Home accessory as well as My Wi-Fi Router connect to the Internet. CHOOSE A NETWORK... Please turn on Wi-Fi on your mobile...
Page 32
Step 5-B 9:00 to the Home app for connecting Yardian to the Wi-Fi & HomeKit network. 24VAC...
Page 34
Step 5-B 9:00 My Yardian Yardian Device Settings Go back to the Yardian app. Check the Yardian status: if it YID: A1B2C34D Online shows “Online”, it means you have successfully connected your Standby Mode: Stop All Watering Yardian to the Internet.
Page 35
Step 5-B Congratulations! You have completed the setup process for your Yardian. WARNING Software may be updated when Yardian is connected to the Internet. Please DO NOT turn off the power when the LED is blinking RED. Interrupting the software update process may...
Page 36
Video feature is only available for selected models...
Control You get to control all zones here Control your zones to start watering at any desired time with just a touch of the button on your mobile device.
Page 41
Control Instant Skip Settings Skip watering tasks for minutes Default minutes 2min Instant Control Selected zones Unselect All MyZone 1 2min MyZone 1 2 minutes Enabled zones Select All MyZone 2 2min Home Control Yard Program Video...
Yard Profile your yard You may set up and manage all your yard profile information here. Our app can automatically detect the connected zones and enable them.
Page 43
to the “Yard” tab. My Yard MyZone 1 MyZone 1 Zone 1 Watering For One Minute Warm Season Grass Name Spray Head MyZone 1 Loam Enable Smart Program/running at 100% Plant Warm Season Grass MyZone 2 Sprinkler Heads Zone 2 Spray Head Fruit, Deciduous Soil Types...
Program Program the watering schedule Set up watering program(s) for each zone according to your needs.
Page 45
My Program Smart Program designs automatic watering Smart Manual Conditional schedules based on your zone profiles, weather data, watering restrictions, and Add New Manual Program your preferences for each zone. Program MyZone 2 Manual Program allows you to create your own watering schedule.
Control Yardian iOS users can also do Yardian basic controls from the Home app. After you have done the settings in the Yardian app, go to the Home app and find Yardian, you can see switches for enabled zones.
Page 47
9:00 Yardian Irrigation System Drag the switch to run or stop watering Scheduled the zone. the gear icon for zone setting. In each zone card, you can: • Enable or disable zones; • Name the zone; • Set watering duration for each zone.
Page 48
The Federal Communication Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 49
Yardian Smart Sprinkler Controller Limited Warranty THIS LIMITED WARRANTY CONTAINS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Aeon Matrix, Inc. may restrict this Limited Warranty service for the Product to the country where the Product or its authorized distributors originally sold the Product.
Page 50
WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively “Ineligible Products”): Products or their components marked as “sample” or sold “AS IS”; or Products or their components that have been subject to: (a) unauthorized modifications or alterations, tampering, unauthorized or improper maintenance or repairs;...
Page 51
LIMITATION OF LIABILITY OF INFORMATION THE AEON MATRIX ONLINE SERVICES (“SERVICES”) MAY PROVIDE YOU INFORMATION (“PRODUCT INFORMATION”) REGARDING YOUR PRODUCT OR OTHER PERIPHERALS CONNECTED TO YOUR PRODUCT (“PRODUCT PERIPHERALS”). THE TYPE OF PRODUCT PERIPHERALS THAT MAY BE CONNECTED TO YOUR PRODUCT MAY CHANGE FROM TIME TO TIME. WITHOUT LIMITING THE GENERALITY OF THE DISCLAIMERS ABOVE, ALL PRODUCT INFORMATION IS PROVIDED FOR YOUR CONVENIENCE “AS IS”...
Need help?
Do you have a question about the PRO19 Series and is the answer not in the manual?
Questions and answers