Maintenance And Cleaning; General Cleaning And Servicing; Replacement Parts; Waste Disposal And Environmental Protection - Grizzly GHS 2842 B Translation Of The Original Instructions For Use

Maintenance and cleaning

Leave all work not described in this
manual to an authorised customer
service centre. Only use original
parts.
Wear hand protection when working on
the blade cylinder.
Switch the shredder off, unplug it form
the mains, and wait for the blade cylin-
der to come to a complete stop before
working on it.

General cleaning and servicing

Do not spray water onto the
shredder. Electric shock hazard.
• Always keep the shredder, wheels and air
vents clean. Use a brush or cloth to clean
it, avoid cleaners and solvents.
• Always check that the shredder and es-
pecially the guards are not worn down or
damaged but firmly attached before use.
Check that the nuts, bolts and screws are
tight.
• Check the covers and guards for damage
and improper attachment. If necessary,
change the components
• Keep the shredder in a dry place out of
children's reach. Do not cover the shredder
in nylon bags, as moisture may develop.

Replacement parts

Spare parts and accessories can be obtained
www.grizzly-service.eu
at
Waste disposal and
environmental protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling cen-
tre when you have finished with them.
Machines do not belong with domestic
waste.
Hand over the device at an utilization location.
The plastic and metal parts employed can be
separated out into pure materials and recy-
cling can be implemented. Ask your Service
Center about this.
GB
81