Before Use - Caretalk TH5001N User Manual

LCD display
1
2
3

BEFORE USE

1. To achieve accurate measurement, it is very important to check the infrared
sensor and sure it is clean before using. To clean the sensor, gently wipe its
surface with a cotton swab slightly moistened with alcohol and immediately
wipe dry with a clean cotton swab. After cleaning, wait at least 15~20
minutes drying time before taking temperatures.
2. Lipid on the forehead may cause an inaccurate measurement, so make
sure the forehead is clean. If you clean the forehead, please keep waiting
for 10 minutes before measuring.
3. If the temperature of the storage area differs greatly from that of the
measuring area, please wait the thermometer temperature to equalize to
the room temperature about 30 minutes before measuring.
4. After the thermometer turns off automatically, you can turn it on by pressing
any button.
5. The interval of each measurement time should be greater than 3 seconds.
9
4
1）Spotlight symbol
8
2）Temperature/data display
3）Forehead temperature symbol
7
4）Object temperature symbol
5）Ambient temperature symbol
6）Fahrenheit symbol
6
7）Celsius symbol
8）Low battery symbol
5
9）Memory symbol
- 7 -