Full Gauge Controls VX-950 HMI Quick Start Manual

Have this manual in your hands
using the FG Finder app.
WARNING
BEFORE INSTALLING THE CONTROLLER WE RECOMMEND READING THE INSTRUCTION
MANUAL THOROUGHLY IN ORDER TO AVOID POSSIBLE DAMAGES TO THE PRODUCT.
PRECAUTIONS WHEN INSTALLING THE PRODUCT:
Before performing any procedure in this instrument, disconnect it from the mains; make sure the
instrument has proper ventilation, avoiding installation in panels containing devices that may force
it to work outside the specified temperature limits;
Install the product away from sources that can generate electromagnetic disturbances, such as:
motors, contactors, relays, solenoid valves, etc.
AUTHORIZED SERVICES:
The installation and maintenance of the product must only be performed by qualified personnel.
ACCESSORIES:
Only use original accessories of Full Gauge Controls.
If you have any questions, please contact our technical support.
DUE TO CONSTANT EVOLUTION, FULL GAUGE CONTROLS RESERVES THE RIGHT TO CHANGE THE
INFORMATION CONTAINED IN THIS MANUAL.
1. DESCRIPTION
VX-950 HMI is an interface to be used with a VX-950 plus controller to facilitate the configuration
and use of the controller.
It enables viewing of the temperatures and the status of the controller, changing the value of function
parameters, and sending commands to the VX-950 plus controller.
2. APPLICATIONS
VX-950 plus
Interface for use with the .
5. INSTALLATION - PANEL AND ELECTRIC CONECTIONS
Panel
(Side view)
WARNING
FOR INSTALLATIONS THAT REQUIRE WATER TIGHTNESS, THE
OPENING TO INSTALL THE CONTROLLER MUST BE 70,5x29mm
MAXIMUM. THE SIDE LATCHES MUST BE FIXED SO THAT THEY
PRESS THE SEALING GASKET TO PREVENT INFILTRATION
BETWEEN THE OPENING AND THE CONTROLLER.
6. RS-485 NETWORK
Keep Sitrad up-to-date through the
site: http://www.sitrad.com.br
CONV. 32,
CONV. 256
or TCP-485
VX-950 HMI
REMOTE INTERFACE
FOR VX-950 plus
Manual Functions
defrost
71 ± 0,5 mm
Dimensions of the clip for
fixing the instrument
Panel (Front view)
IMPORTANT
IT IS ESSENTIAL TO USE THE CORRECT TOOLS IN ORDER TO
AVOID DAMAGES TO THE INSTRUMENT'S CONNECTION
TERMINALS:
3/32''(2.4mm) SLOTTED SCREWDRIVER FOR ADJUSTMENTS
IN THE SIGNAL TERMINALS;
PHILLIPS SCREWDRIVER #1 FOR ADJUSTMENTS AT THE
POWER TERMINALS.
®
HMI
Sitrad
VEE
Power
®
Different from version 01, only one VX-950 HMI must be
used for each VX-950 Plus.
IP 65
FRONT
Protection
lock
level
3. TECHNICAL ESPECIFICATIONS
Direct supply
Operation temperature
Product dimensions
Dimensions of the clip for fixing
the instrument
4. INDICAÇÕES E TECLAS
Compressor output LED indicator
FG-CAP in use LED indicator
Quick access
Menu key (Flatec)
Set key
115 Vac
connection
230 Vac
connection
VX-950 HMI
A B
vx-
950 plus
HMI SENS. TEMP. / DIG. IN
1 | HMI (A) 5-6 | digital input (door)
2 | HMI (B)
6-7 | sens. suction temp.
SENS. PRESS. 8-9 | sens. evap. temp.
3 | 12Vdc (brown) 9-10 | sens. ambient temp.
4 | 4~20mA (green)
SITRAD RELAYS
11 | SITRAD (A) 13-14 | fans
12 | SITRAD (B) 15-16 | compressor
17-18 | defrost
|
Power Supply
12Vdc - 1.3A
A B
A A
B B
A B
WARNING!
VX -9 50 HM I VX -9 50 HM I
VX-950 HMI: 115 or 230 Vac ±10%(50/60 Hz)
0 to 50°C / 32 to 122°F
76 x 34 x 77 mm (LxAxP)
71 ± 0,5 x 29 ± 0,5 mm (see item 5)
Fan LED indicator
Defrost LED indicator
Power-saving mode LED indicator
Temperature unit LED indicator
VX-950 HMI
A
B
POWER
5 6 7 8
SUPPLY
9 10 11 12 13 14 15 16 17
1 2 3 4
115 Vac
A
B
POWER
5 6 7 8
SUPPLY
9 10 11 12 13 14 15
1 2 3 4
230 Vac
VX-950 HMI
A B
vx-
950 plus
HMI SENS. TEMP. / DIG. IN
HMI
1 | HMI (A) 5-6 | digital input (door)
Sitrad 2 | HMI (B)
6-7 | sens. suction temp.
SENS. PRESS. 8-9 | sens. evap. temp.
VEE
3 | 12Vdc (brown) 9-10 | sens. ambient temp.
Power
4 | 4~20mA (green)
SITRAD RELAYS
11 | SITRAD (A) 13-14 | fans
12 | SITRAD (B) 15-16 | compressor
17-18 | defrost
|
Power Supply
12Vdc - 1.3A
A B
A A
B B
A B
Increase key
Decrease key
16 17