-3- FUNZIONI E IMPOSTAZIONI
3.1 Controllo del collegamento delle unità dei
"delegati" e del "presidente"
Porre il SELETTORE MICROFONO (3) in posizione
modalità test (fig.9). Tutte gli indicatori di luce ad
anello e i LED delle unità dei "delegati" e del "pre-
sidente" dovranno accendersi se il collegamento è
effettuato correttamente.
3.2 Uso del tasto microfono relativo all'unità
del "delegato"
In base alla posizione del SELETTORE MODALITÀ
MICROFONO (3) dell'unità centrale, premendo il
tasto microfono (15) su un'unità del "delegato" si
attiverà il microfono (fig.10).
CS500 series
I
-3- FUNCTION AND SETTING
3.1 Testing the connection of the delegate and
chairman units
CS500M
2
3
5
5
1
4
4
6
4
6
4
3
7
3
7
3
2
8
2
8
2
1
9
1
9
1
0
10
0
10
11
11
Put the microphone mode switch (3) in the test
position (fig.9), all light-ring indicators and LEDs
of the delegate and chairman units must lit if
properly connected.
3.2 Using the microphone button of the
delegate unit
Depending on the position of the microphone
mode switch (3) on the Central Unit, pressing the
microphone button (15) on a delegate unit will
activate the delegate microphone (fig.10).
GB
2
3
1
4
4
3
2
1
Fig.9
Fig.10
15