Wireless Remote Controller - LG ATNQ18GPLE6 Owner's Manual

PRODUCT INTRODUCTION
10

Wireless Remote Controller

This air-conditioner is equipped with wireless remote controller basically. But if you want to be
available with wired remote controller, you pay for it.
1
2
3
4
5
6
7
8
9
Operation Mode
Cooling Mode
Auto Operation Mode
Dehumidification Mode
Fan Mode
1
VANE ANGLE button
Used to set each vane angle.
2
FUNCTION SETTING button (Optional)
Used to set or clear auto clean, smart clean.
3
ON/OFF button
Used to turn on/off the unit.
4
JET COOL button
Speed cooling operates super high fan speed.
10
5
LEFT/RIGHT AIRFLOW button (Useless)
11
Used to set the desired left/right(horizontal)
12
airflow direction.
6
UP/DOWN AIRFLOW button
13
Used to stop or start louver movement and
set the desired up/down airflow direction.
14
7
ON TIMER button
Used to set the time of starting operation.
15
8
SLEEP TIMER button
16
Used to set the time of sleeping operation.
(Refer to timer setting)
17
9
SET / CLEAR button
Used to SET / CLEAR the timer.
Used to set the current time (if it input for 3
seconds).
10
PLASMA button (Optional)
Used to start or stop the plasma-purification
function.
11
ROOM TEMPERATURE SETTING button
Used to select the room temperature.
12
OPERATION MODE SELECTION button
Used to select the operation mode.
13
INDOOR FAN SPEED SELECTION button
Used to select fan speed in four steps low,
medium, high and auto.
14
ROOM TEMPERATURE CHECKING button
Used to check the room temperature.
15
OFF TIMER button
Used to set the time of stopping operation.
16
TIMER SETTING(Up/Down)/LIGHT button
Used to set the timer.
17
RESET button
Used to reset the remote controller.