Assembly Steps - Silvercrest SMH 30 A1 Assembly Instructions Manual

Assembly steps

Step 1: Attaching the wall bracket to the wall
♦ Start by selecting a suitable mounting height. Take into account the dimen-
sions of the appliance that you want to mount on the product. Read the
operating instructions for the appliance to ensure the required distances to
walls or cupboards.
♦ Hold the wall bracket up to the to the desired position on the wall to use it
as a template and align it with the help of a spirit level.
♦ Mark the location of the six drill holes with a pencil.
♦ Drill holes with a diameter of 10 mm and a depth of at least 50 mm at the
marked positions.
♦ Insert the supplied wall plugs S10 x 50 mm
♦ Screw the wall bracket to the wall using the supplied screws Ø 8 x 50 mm
NOTE
► Start with the inner holes as you will need to leave room for the screwing
motion of the open-ended spanner.
SMH 30 A1
C
D
into the holes.
C
50 mm
GB │ CY
.
D
10 mm
│
5 ■