Advertisement
Using Your Oster
Blend Active personal blender
®
Clean blender according to the instructions in the "Cleaning and Storing
Your Blender" section.
1
Place the Blend Active bottle on
a flat surface with the open end
facing up. Fill the bottle with your
favorite ingredients. Do not fill
the bottle above the top of the
bottle grip.
2
Fasten the blade assembly on the open
end of the bottle.
Turn the bottle upside down, line up
arrows on the blade assembly to the
arrows on the base, and place the
bottle in the base.
Blending begins by pressing the bottle
down in the base.
For best results, simply turn the bottle
clockwise and lock the bottle in the
base, hands-free blending will begin.
Once you stop pressing the bottle into
the base or unlock the bottle from the
base, blending will stop.
3
Turn the bottle over and place on a flat surface.
Replace the blade assembly with the drinking lid.
Take the Blend Active sport bottle with you
throughout the day to stay hydrated.
5 | www.oster.com
BLST120-XXX-073_17ECM2.indd 5-6
TIP: After you've consumed your blended beverage, wash out the bottle and reuse it
throughout the day for water or other cold liquids.
Note: For optimal performance, place desired ingredients in the bottle according to the
following order: Liquids, fresh ingredients, frozen fruit, yogurt and ice cream.
Blending Tips
• Put liquids in the bottle first, unless a recipe says otherwise.
• Cut all firm fruits and vegetables into pieces no larger than ¾ inch (1.8 cm) to 1 inch
(2.5 cm).
• Don't overload bottle. If the motor stalls, turn the blender off immediately, unplug the
unit and let it cool for at least 15 minutes. Then, remove a portion of the food and
continue.
• This blender will not mash potatoes, whip egg whites or substitute dairy toppings,
mix stiff dough or grind raw meat.
Cleaning and Storing Your Blender
IMPORTANT: UNPLUG BEFORE CLEANING. DO NOT IMMERSE THE
BLENDER BASE IN WATER OR ANY OTHER LIQUID. Use a damp, soft sponge
with mild detergent to clean the outside of the blender base. All parts except for the
blender base are dishwasher-safe. You can also wash the parts, except the blender
base, in warm, soapy water. Rinse well and dry.
Storing Your Blender
After cleaning, reassemble blade assembly to open end of the bottle and then place in
the blender base. Snap the drinking lid on the other end of the bottle.
www.oster.com | 6
10/12/17 14:03
Advertisement
