G10061; Operating; Key Lock; Safety Device - G3 Ferrari Energy User Manual

NOT SUITABLE FOR POTS, PANS AND VESSELS: Made of copper, glass, ceramic, aluminum, with
a rounded base or with vessels with diameter less than 8 cm.
DESCRIPTION G10061
1. Cooking plate

OPERATING

- Place the unit on a flat and stable surface, leaving enough space at the sides of the product.
- Place a suitable pan in the center of the cooking area (2) and put the food inside the vessel.
Connect the plug to the power supply: the unit will beep and display shows "Lo".
-
- Push ON/OFF button on panel (4) the red light of ON/OFF goes on, and appliance is in idle state.
1) Cooking with power regulation
Touch one time the "Select" button that is below the hob you want to use. The unit turns on and the
-
display shows "1200W".
With the keys "Max" e "Min"it is possible to bring power of hob to maximum or minimum.
-
- Using the keys "+" and "-" it is possible to change the power and thus the amount of heat transmitted.
Power can be set on: 200, 400, 600, 800, 1000. 1200, 1400, 1600, 1800, 2000W.
After cooking, push the ON / OFF button, to turn off the appliance. Display shows "Lo"
-
1A) Timer after power regulation
Press "Select" during cooking. The red light "time" flickers, and display shows "0".
-
With the keys "+" e "-" set the duration of cooking, up to 180 minutes.
-
- Display will show for some seconds the time set.
- During cooking on the display will appear the power selected, and the time set.
- Cooking will stop automatically when time finishes.
2) Cooking with temperature regulation
Press "Select" 3 times, until the red light on "Temp" switches on, and display shows "180".
-
With the keys "+" e "-" select desired temperature. There are 10 selectable levels, from 60° to 240°C.
-
2A) Timer after temperature regulation
Press "Select" a 4
-
With the keys "+" e "-" set the duration of cooking, up to 180 minutes.
-
- Display will show for some seconds the time set.
- During cooking on the display will appear the power selected, and the time set.
- Cooking will stop automatically when time finishes.

KEY LOCK

To lock the keypad on the control panel (4) press together the keys "+" e "-" during use. On display will
appear L to indicate the lock. To unlock press together the keys "+" e "-".

SAFETY DEVICE

The unit turns off automatically if there is any pan placed on it, or it is removed, or it is made of such a
material not suitable for induction cooking.
In this case, the unit will show E0 for about 30 seconds, and then goes into stand-by mode, showing "Lo".
2. Cooking area
time. The red light "time" flickers, and display shows "0".
th
3. Bottom: ventilation fan
Control panel (4)
4. Control panel
11