SJRC S Series Manual

SJRC S Series Manual

Real-time video and image transmission quadcopter

Advertisement

S-SERIES
2.4GHz FPV real-time video and image
transmission Quad-copter
S20W
(GPS)
In order to make sure that it meets the requirement of the electromagnetic environment of the aviation radio station, flying
within the scope of 10 kilometers on each side by taking the airport runway center line as the middle line is HIGHLY FORBIDDEN
or flying within the scope of 20 kilometers by taking both ends of the runway as the center is HIGHLY FORBIDDEN. Flying on
the route of the airline is also PROHIBITED. Stop using all kinds of flying models or unmanned Quad-rotors in the AREA that
prohibited by related authority or department of our country.
INTRODUCTION
Thank you for purchasing the SJ-Series GPS Drone. Please read all instructions and warnings carefully before
operating. Please also keep this instruction manual for future reference and maintenance.
IMPORTANT:
1. This product is not a toy. It is a precision device; integrating machinery and electronics with air mechanics
and high frequency transmission. It requires correct assembly and debugging to avoid any accident. The
user should operate and control this product in a safe manner. In case of incorrect operation, it may cause
serious injury or damage property. It can also be lost due to incorrect operation.
2. This product is suitable for experienced UAV pilots no less than 14 years of age.
3. In the event of a problem during using, operating, or maintenance, please contact the local sales agent
or retailer or keep in touch with the responsible staff of our company.
SAFETY PRECAUTIONS:
This R/C flying model can be dangerous when in use, please make sure you keep it far away from any
persons or spectators when flying. In-correct Installation, poor conditions, or users not familiar with
operation may cause damage to the aircraft or injure people or may cause an unexpected accident. Please
pay close attention to flying safety and learn to recognize more dangerous conditions which may cause an
accident due to your own negligence.
1. Keep it far away from my structures or crowds.
This R/C aircraft may vary slightly in speed or sensitivity while flying and can cause potential danger.
Therefore, please keep it far away Item crowds, buildings, trees, structures, high-voltage wire, etc. Please
also avoid flying in adverse weather conditions such as rain, electrical storms, and high winds to ensure
safety of the user, any spectators, and surrounding properly.
2. Keep it away from any moist environment.
The inside of the aircraft is composed of many precision electronic and mechanical parts. Therefore, please
try to avoid any moisture or water content from entering the main body of the aircraft as it may cause a
breakdown of the mechanical and electronic parts and thus cause an accident.

Advertisement

Table of Contents
loading

Summary of Contents for SJRC S Series

  • Page 1 S-SERIES 2.4GHz FPV real-time video and image transmission Quad-copter S20W (GPS) In order to make sure that it meets the requirement of the electromagnetic environment of the aviation radio station, flying within the scope of 10 kilometers on each side by taking the airport runway center line as the middle line is HIGHLY FORBIDDEN or flying within the scope of 20 kilometers by taking both ends of the runway as the center is HIGHLY FORBIDDEN.
  • Page 2 3. Only operate with included parts for intended use. Please use the original parts made by SJ-Series for any re-equipping or maintenance to ensure flying safety. Please operate and use only under the scope of the product function permitted. Using un-approved parts will void warranty.
  • Page 3: Maintenance

    7. Small parts are included with this product. Please place it beyond the reach of the children to avoid a CHOKING HAZARD or parts being mistakenly swallowed. 8. Playing on the road or near high traffic areas a strictly FORBIDDEN so as not to cause an accident. 9.
  • Page 4: Assemble The Camera

    DRONE PARTS 1. HD Camera 3. Blade 5. LED indicator 2. Landing Rack 4. Motor QUADROTOR LI-POLYMER 1. Batter power indicator 2. USB charging port 3. Battery switch Press the battery shortly to switch on, hold for 2 seconds to switch it off. ASSEMBLE THE PROPELLER Please note that the letter "A"...
  • Page 5: Remote Control

    3. Remove camera by pressing the camera lock Pic. 3. on the bottom of the drone, and push the camera out to disconnect the camera wire from the port. 4. Insert the TF Card into Camera port. Insert the optional memory card (not included) into the webcam module's card channel which is on the bottom of the quad-copier, connect the quad-copter's power, and sync quadcopter and remote control.
  • Page 6 Operation method: Throttle Joystick Direction Joystick FLY SAFE Fly in open Strong GPS Signal Maintain Line of Fly Below400 Areas Sight feet (120 m) Avoid flying over or near obstacles, crowds, high voltage power lines, trees, airport or bodies of water. DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass.
  • Page 7 1. Software download and installation QR code of "SJ-GPS" software for Apple IOS QR code of "SJ-GPS" software for Android system system (Please scan this QR code to install this (Please scan this QR code to install this software). software). - Connect the power of this model, and then access into "SETTING"...
  • Page 8 port of the drone. When charging, the indicator on the power switch will become blue blinking. When fully charged, all indicators on the power switch will turn solid blue. 2. Quad-copter can be charged by the mobile power or car-loaded power. 3.
  • Page 9 Step 3: Initiate GPS Compass Calibration - Joysticks at the 1 & 11 o'clock positions. - Lights rapid-alternate between blue/red (back) and white/red (front). - App Drone Status: "Compass calibration". Step 4: Reset to Factory Setting / Calibrate Gyroscope - Press the Joysticks into the 11 & 1 o'clock positions. - Lights rapid-blinking blue (back) and white (front).
  • Page 10: App Introduction

    Flight Setting On APP APP INTRODUCTION Wait until the Drone Status says "Ready to Fly" before initiating fight. This will ensure that your GPS is synced and your drone is ready to fly. Back to Main Controls Flip Screen VR Split Screen Media Gallery Flight Record Menu...
  • Page 11: Take-Off/Landing/Emergency Stop

    Pic. 1 Pic. 2 Pic. 3 1. Open the APP, click , enter into the file (Pic 1.) 2. Click once or press to choose the photos which will be shared, click choose the platforms that need to be shared (Pic 3). Reminder: You can share 1 picture or 9 pictures at the same time.
  • Page 12: Return-To-Home Rth

    Press , the propellers will spin and the drone will take off at an altitude of about 5 feet. (Always keep the head of drone facing forward). Press , the drone will land automatically. Remember to always keep your hands on the transmitter as long as the motor is still pinning.
  • Page 13 The Return to Home (RTH) function brings the drone back to the last recorded Home Point. There are three types of RTH: Smart RTH / Low--Battery RTH / Failsafe RTH 1. Smart Return To Home Press the Return to Home Button on your Transmitter or tap on the App of your smart phone, and the transmitter will start beeping.
  • Page 14 Don't turn your direction. Don't turn your direction. Under Headless Mode, the forward direction is the direction the pilot faces where the pilot pairs the drone with the transmitter. If the pilot pushes the direction joystick forward the drone will fly forward. If the pilot pushes the direction joystick backward, the drone will flight towards him/her.
  • Page 15: Camera Functions

    CAMERA FUNCTIONS ICON ON APP Take Photo Take Video Press on the Transmitter or tap on APP, the red indicator on camera will flash once, indicating the camera takes one photo. Press on the Transmitter or tap on APP, the red indicator will keep flashing, indicating the camera is taking video.
  • Page 16 • Camera Lens: FOV 120°/2.0 Still Photography Modes: Single shot Video Recording Modes: HD 1280x720P / HD 1920x1080P (Depend on conditions and mobile device) Photo: JPEG Video: AVI Supported SD Cards: TF Card 8GB (not included) Operating Temperature: 32° to 104° F (0° to 40° C ) •...
  • Page 17: Common Problems And Solutions

    Wrench X 1pcs (for taking the landing rack down) Propeller Gear X2 USB cable X1 Only for charging Screw driver X1 Blade cap X2 Screw X4 COMMON PROBLEMS AND SOLUTIONS THE PROBLEM REASON COUNTERMEASURES Drone lights flashing and no 1. Remote is not synced to the 1.

This manual is also suitable for:

S20w

Table of Contents