Advertisement
Fig.10
5. CLEANING AND MAINTENANCE
5.1
Cleaning
NOTE: If the suction is weak, remove the paper or
fabric filter and remove the dust by hand-
patting the filter.
5.1.1
Remove the vacuum cleaner head to
access the filter. Refer to Fig. 12.
5.1.2
Remove all dust on the filter. Clean and if
necessary air-dry the filter for further use.
5.2
Emptying the Tank
5.2.1
Position the cleaner next to a suitable
container or drain. Lock tank onto frame as
shown in fig.4. Put the rear wheel locks
on. Hold the frame handle with one hand
and lift the tank to the emptying position
using the tank handle. Refer to Fig. 13.
6.
TROUBLESHOOTING
Cleaner will not operate.
Dust comes from the motor cover.
Reduced efficiency and increased
motor speed/vibration.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Fig.9
Fig.11
No power supply.
Faulty power cable, switch or motor.
Container full of liquid.
Filter missing or damaged.
Filter clogged.
Nozzle, hose or bin inlet blocked.
Original Language Version
Fig.12
Fig.13
Check supply.
Check and repair or replace faulty item.
Empty container.
Fit or replace.
Replace or clean filter.
Check nozzle, hose and bin inlet for blockage.
PC455, PC477, PC455AK1, PC477AK1
Issue: 3 - 17/11/10
Advertisement
