Temperature Control
Turbo Freeze Light
Lock Controls Light
High Temp Light
Door Open Light
This electronic temperature control is located on the
front of the freezer door . The temperature is factory-
preset to provide satisfactory food storage temperatures .
To adjust the temperature setting, press - to decrease
temperatures and + to increase temperatures. Allow
several hours for the temperature to stabilize between
adjustments .
High Temp Alarm
This electronic control has a high temperature alarm
feature . An alarm will sound if the freezer temperature
is high . To silence the alarm, press Alarm Reset on the
control panel .
The High Temp will continue to be displayed on the
control panel until set temperature has been restored .
The alarm will sound again if the temperature is not
restored and remains high in six hours .
Turbo Freeze
To enable Turbo Freeze, press Turbo Freeze until
Turbo Freeze ON light turns on . The unit will be in
"Turbo Freeze" mode for 8 hours and the ON light for
Turbo Freeze will stay illuminated . After the 8 hours is
completed, Turbo Freeze turns off automatically . The
ON light will be off to show that Turbo Freeze is off . To
exit Turbo Freeze before the 8 hour automatic shutoff,
press Turbo Freeze until ON light for Turbo Freeze is off .
Control Lock
To lock the controls, press Control Lock and hold for 3
seconds until the ON light for Control Lock turns on .
To unlock, press and hold Control Lock for 3 seconds .
The ON light for Control Lock turns off and the control
panel will be unlocked . Control setting cannot be
changed when the control is locked .
6
Decrease Pad
Turbo Freeze
Control Lock
Alarm Reset
High Temp
Door open
°F
°C
Increase Pad
Demo
ON
ON
Hold 3 Sec
Alarm Reset
Pad
Power Fail
If a power outage has caused the internal temperature
to be high, the high temp alarm will sound and the
temperature display will flash . Pressing Alarm Reset on
the control will silence the alarm and stop the flashing,
but High Temp LED will stay on until your freezer
reaches a safe storage temperature .
If the internal temperature has been restored before you
press Alarm Reset, the sound alarm will stop on its own,
and the High Temp LED will go off automatically . The
temperature display will continuing flashing to remind
you that a power outage has occurred . Press Alarm
Reset to stop the flashing .
Door Open Alarm
If your door has been left open for more than 2 minutes,
the control panel will display Door Open and will sound
an alarm until the door has been closed or Door Open
is pressed on the control panel . If Door Open has been
pressed but the door has not been closed, Door Open
will continue to be displayed on the control panel until
the door has been closed . If 10 minutes after Door
Open has been pressed, the door is still open, the door
open alarm will sound again .
C or F Setting
To change between C° or F°, press and hold the - and +
pads at the same time for 3 seconds .
Control Dormant
The control settings are displayed at normal condition .
Press and hold Control Lock and Turbo Freeze for
3 seconds . The electric control will enter into Dormant
Mode and will not show the control settings . The control
settings will be displayed for 30 seconds if one of the
buttons on the control is pressed or the door is opened
while in Dormant Mode . Press and hold Control Lock
and Turbo Freeze for 3 seconds again will disable
Dormant Mode .
49-1000101 Rev. 0