Maintenance - Halo IOT Smart Sensor Administrator's Manual

Maintenance

HALO is an environmental sensor and as such, proper maintenance will keep your HALO operating at peak
levels. This guide will give you recommended best practices for your HALO maintenance.
1. Cleaning
a. Methods of cleaning that are "HALO Safe"
1. Gentle vacuum without physical contact with the HALO housing.
2. Apply small amount of water to a towel to make it damp, not soaked, and wipe the cover
and sides of the HALO.
b. Disable or notify of alarms that will be activated during cleaning via the HALO GUI interface of
HALO Device Manager.
c. Interval for cleaning is based on the environment and amount of sediment collecting on the HALO
housing. It is recommended to clean the HALO at least every 90 days.
2. Maintaining Your Thresholds
a. Environments change over time. Periodic review of your environmental conditions will ensure
that your thresholds are set appropriately, and you can receive notifications of events.
1. Review active events signatures in your HALO.
2. Use the log to establish average levels of the events and signatures you are using.
3. Adjust the thresholds of your active signatures and events to appropriate levels.
V2.2 - 9/09/2020
ADMINISTRATOR MANUAL
1. Dry and wipe away any residue.
2. Do not remove the cover.
3. Do not allow liquid to penetrate into the interior of the HALO housing.
33
PAGE